Sony BAVIA XBR-75X900E Referans Kılavuzu - Sayfa 4

TV Sony BAVIA XBR-75X900E için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Sony BAVIA XBR-75X900E 24 sayfaları.

• Install the TV so that the TV's Table-Top Stand does not

protrude out from the Stand (not supplied). If the Table-

Top Stand protrudes out from the Stand, it may cause TV

set to topple over, fall down, and cause personal injury or

damage to the TV.

XBR-75/65/55X900E

XBR-75/65X850E

• Route all AC power cords and connecting cables so that

they are not accessible to curious children.

Recommended Measures to Secure the

Consider the following measures when securing your TV to

a Stand (not supplied).

Secure the Stand for the TV.

Make sure the Stand can adequately support the weight

of the TV. Use two angle braces (not supplied) to secure

the Stand. For each angle brace use the appropriate

hardware to:

• Attach one side of the angle brace to the wall stud.

• Attach the other side to the Stand.

Angle brace

(not supplied)

Stand

Secure the TV to the Stand.

Use the optional hardware listed as follows (not

supplied):

• M6 machine screws (screwed into the TV's rear cover).

• A screw or similar (attach it to the Stand).

• Rope or chain (strong enough to support the weight of

the TV). Make sure that there is no excess slack in the

rope or chain.

XBR-75/65/55X900E

Screw hole on the rear cover

Rope or chain (not supplied)

Screw (not supplied)

M6 machine screw

(previously removed)