Cisco MX200 G2 Başlangıç Kılavuzu - Sayfa 22

Konferans Sistemi Cisco MX200 G2 için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Cisco MX200 G2 46 sayfaları. Wall mount
Ayrıca Cisco MX200 G2 için: Kurulum Kılavuzu (6 sayfalar), Kurulum Kılavuzu (7 sayfalar), Kurulum Kılavuzu (8 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar)

Cisco MX200 G2 Başlangıç Kılavuzu
Cisco TelePresence Video Systems
Contents

Setting the Administrator settings menu password

When starting up the system for the first time, the Administrator
Settings menu password is not set.
NOTE:
We strongly recommend that you define a password to
protect the Administrator Settings menu, because these settings
affect the behavior of the video conference system.
1. Go to
Home > Settings > Administrator settings > Set menu
password.
On the remote control, press the # key to toggle between
lower or upper case characters and numbers: abc/
ABC/123.
2. Enter the menu password. The password you enter is
hidden; each character is replaced with an asterisk (*).
3. Select
Save
to confirm the changes, or
without saving.
4. Press
Home
(
) to exit.
Back to task overview
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Introduction
User interfaces
Cancel
to leave
Configuration
Configuration
22
Getting Started Guide
Appendices
Contacts
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.