DigiTech DIGIDELAY Manuel - Sayfa 8

Müzik Pedalı DigiTech DIGIDELAY için çevrimiçi göz atın veya pdf Manuel indirin. DigiTech DIGIDELAY 16 sayfaları. Digital delay

7. Pedal Release Pins

These two pins are spring-loaded hinges that hold the pedal in place.

Push these pins in to release the pedal from the pedal chassis exposing

the battery compartment. (See battery replacement diagram).

8. Pedal

Press the pedal to turn the effect on and off. The Pedal is also used for

tapping in the delay time when using the Tap Tempo delay feature.

9. Out 1(Mono) Jack

Connect this output to a single guitar amplifier when only one amp or

mixer channel is being used.

10. Indicator LED

This LED indicates when the effect is turned on. When using the Tap

Tempo delay feature, the LED will flash at the rate of the delay time. If

the LED becomes dim or does not light when the cables are connected,

the battery needs to be replaced.