Cisco Profile Series Başlangıç Kılavuzu - Sayfa 18

Konferans Sistemi Cisco Profile Series için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Cisco Profile Series 42 sayfaları. Jbod on the 12g sas modular raid controller
Ayrıca Cisco Profile Series için: Başlangıç Kılavuzu (41 sayfalar), Kullanıcı Kılavuzu (44 sayfalar), Kullanıcı Kılavuzu (7 sayfalar), Başlangıç Kılavuzu (35 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kurulum Kılavuzu (44 sayfalar), Yapılandırma Kılavuzu (13 sayfalar), Kurulum Sayfası (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Kurulum Kılavuzu (16 sayfalar), Başlangıç Kılavuzu (32 sayfalar), Manuel (16 sayfalar), Başlangıç Kılavuzu (46 sayfalar)

Sayfayı Yazdır

Cisco TelePresence Video Systems

Contents

Provisioning set-up

(when using a provisioning system)

if in doubt for any of the parameters below, contact your

provisioning system provider.

See the administrator guide for your product to find more

information about the provisioning settings.

Select provisioning infrastructure

1. Go to

Home > Settings > Administrator settings > Advanced

configuration > Provisioning > Mode

sioning infrastructure:

• tMS – Cisco telePresence Management System

•

Callway – Webex telepresence

•

CuCM – Cisco unified Communications Manager

•

Auto - the system starts provisioning by first trying VCS,

then tMS and finally CuCM.

if you select Off, all configurations must be set manually on

the video system.

Always save the new value when you change a setting

• drop down list selection: Navigate to the correct value

and press the

( )

key to save, or press the left arrow

key

to leave without saving.

• text entry in an input field: enter the text, navigate to

Save

to save the change, or navigate to

without saving; then press the

Back to task overview

D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.

Introduction

User interfaces

Set the required provisioning parameters

Which parameters to set depend on which infrastructure was selected.

TMS

1. Go to

Home > Settings > Administrator settings > Advanced

configuration > Provisioning > ExternalManager.

2. enter the iP address or dNS name of the Cisco tMS server

in the

Address

3. enter the

sponding input

and select a provi-

4. it may be required to authenticate the video system

with Cisco tMS. if so, go back to

LoginName

Webex Telepresence (formerly Callway)

upon ordering the Cisco Webex telepresence service, you

have received a

Please contact your company's Webex telepresence admin-

istrator if you do not have a video phone number and an

activation code.

1. Go to

Home > Settings > Administrator settings > Advanced

configuration > Provisioning

2. enter the Video number in the

3. enter the Activation code in the

Ok/

Cancel

to leave

( ) key

to confirm.

Confirguration

Configuration

input field.*

Path

to the provisioning service in the corre-

field.

Provisioning,

and enter

and

Password

in the respective input fields.

Video number

and an

Activation

code.

LoginName

input

field.

Password

input

field.

Getting Started Guide

Appendices

CUCM

1. Go to

Home > Settings > Administrator settings > Advanced

configuration > Provisioning > ExternalManager.

2. enter the iP address or dNS name of the uCM provision-

ing server in the

Address

input field.*

You can find more details about setting up Cisco uCM provi-

sioning in the Administering TC endpoints on CUCM guide.

NoTe:

if you wish to use Secure Mode for CuCM provision-

ing, you must use the web interface.

the dHCP server can be set up to provide the external Manager address

automatically (option 242 for tMS; option 150 for uCM). Any input in the

input field overrides the setting provided by dHCP.

Contacts