DigiTech Genesis 1 Kullanıcı Kılavuzu - Sayfa 6

Müzik Pedalı DigiTech Genesis 1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DigiTech Genesis 1 12 sayfaları. Genetx guitar processor
Ayrıca DigiTech Genesis 1 için: Kullanıcı Kılavuzu (12 sayfalar)

Sayfayı Yazdır

Rear Panel

The Genesis1's rear panel has the following connections:

1. Input - Plug your instrument into this jack.

2. CD INPUT(1/8" Stereo TRS) - Connect a CD headphone output to this

jack.

3. Headphone Output - Plug stereo headphones to this jack.

4. LEFT OUTput - Connect an amplifier input, a power amp input, or line

input of a mixing console to this jack.

5. RIGHT OUTput - Use this jack in conjunction with the left output for

stereo applications. Connect a second amplifier input, or the right input

of a stereo power amp.

6. LINE OUTPUT - (1/8" Stereo TRS) - Connect to a computer sound

card input, or line level input with this jack.

7. FOOTSWITCH Jack - Connect the FS300 footswitch to remotely con-

trol effects to this jack.

8. POWER Jack - Connect only the Digitech PS913B power supply to this

jack.

Setup Connections

The Genesis 1 has several different connection options. You can run

mono into an amp or power amp, stereo into two amps, stereo direct

into a mixing console, direct into a computer sound card, or any

combination of these. Before connecting the Genesis 1 to your system,

make sure the Genesis 1 is OFF and your system is ON.

Powering Up

1.Turn the volume completely down on your system.

2. Connect the Genesis 1's outputs to the inputs of your system.

LEVEL

3.Turn the

Genesis 1.

4. Connect the power to the Genesis 1.

5. Bring up the volume on your system.

6.While playing, slowly turn up the

tening level on the Genesis 1.

knob down to the minimum position on the

LEVEL

knob to the desired lis-