Epson L395 Buradan başlayın

Hepsi Bir Arada Yazıcı Epson L395 için çevrimiçi göz atın veya pdf Buradan başlayın indirin. Epson L395 4 sayfaları.

L395

Start Here

Read these instructions before using your product.

Unpack

Note:

Do not open the ink bottles until you are ready to fill the ink

tanks. The ink bottles are vacuum packed to maintain reliability. Ink

bottle design may vary.

Remove all protective materials from the product.

Lift up the scanner unit and remove all protective materials

from inside the product.

Caution:

Do not touch the flat white cable or the ink tubes and

their translucent cover.

Lower the scanner unit.

Fill ink tanks

Note:

This product requires careful handling of ink. Wear disposable

gloves and place a sheet of paper or plastic under the ink tank when

you fill or refill the ink tanks, as ink may splatter. If ink spills, wipe it off

immediately with a damp towel to avoid permanent stains. If ink gets on

your clothes or belongings, it may not come off.

Warning:

Keep the ink bottles out of the reach of children and do not

drink the ink.

Open the ink tank cover, then remove the cap for the black

ink tank and attach it to its holder.

Unpack the black ink bottle.

Depending on the ink bottle included with your product,

snap off the bottle tip or unscrew the lid.

Remove the bottle cap. Carefully remove the protective

seal (avoid touching the ink underneath the seal), then

close the bottle cap tightly.

Caution:

Be sure to close the bottle cap tightly, or ink may leak.

Fill the tank using all of the ink in the bottle.

Note:

Refer to the color coded sticker on the ink tank to identify

the color of each tank.

Caution:

Be sure to fill each tank with the correct ink color.