Cisco Quick Set C20 Başlangıç Kılavuzu - Sayfa 28

Konferans Sistemi Cisco Quick Set C20 için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Cisco Quick Set C20 42 sayfaları. Tc7.3, english, december 2015
Ayrıca Cisco Quick Set C20 için: Başlangıç Kılavuzu (41 sayfalar), Kullanıcı Kılavuzu (44 sayfalar), Başlangıç Kılavuzu (42 sayfalar), Başlangıç Kılavuzu (35 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Sorun Giderme Kılavuzu (37 sayfalar), Kurulum Sayfası (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Başlangıç Kılavuzu (32 sayfalar), Kullanıcı Kılavuzu (48 sayfalar), Başlangıç Kılavuzu (46 sayfalar)

Sayfayı Yazdır

Cisco TelePresence Video Systems

Contents

Setting the system/codec

password

You need a user name and a password to sign in to the web

and command line interfaces of your system.

the video conference system is delivered with a default user

account with the user name

admin

and no password set. this

user has full access rights to the system.

A warning on the screen of your video system indicates if no

administrator password is set. to remove the warning you

must set an administrator password.

NoTe:

We strongly recommend that you set a password for

the

admin

user to restrict access to system configuration.

Make sure to keep a copy of the password in a safe

You have to contact your Cisco representative if you have

forgotten the password.

1. Click your user name in the upper right corner and select

Change

password.

2. enter the

Current

password, the

New

the new password in the appropriate input fields.

the password format is a string with 0–64 characters.

if a password is not currently set, use a blank

password.

3. Click

Change

password.

If you are changing a value setting,

you have to always click

save

to confirm the change.

Back to task overview

D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.

Introduction

User interfaces

Setting the menu password

initially, no menu password is set to restrict access to the

Administrator menus on the touch controller and the remote

control.

You need to enter this password to configure the video system

using a touch controller or a remote control.

the Administrator Settings menu password cannot be set

using the touch controller.

NoTe:

We strongly recommend that you define a password to

protect the Administrator Settings menu, since these settings

affect the behavior of the video conference system.

1. Go to the

2. Click the text

place.

in the upper right corner.

3. enter the menu password in the

4. Click

Save

5. the link text in the upper right corner should now be

password, and repeat

Administrator Settings menu

Current

Confirguration

Configuration

tab and select

System

Configuration.

Set Administrator Settings menu password

Password

field.

to confirm the change.

Change

password.

Getting Started Guide

Appendices

Contacts