Cisco Quick Set MX200 Kullanıcı Kılavuzu - Sayfa 24
Konferans Sistemi Cisco Quick Set MX200 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco Quick Set MX200 44 sayfaları. Telepresence conference system
Ayrıca Cisco Quick Set MX200 için: Hızlı Referans Kılavuzu (2 sayfalar)
Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, MX200
Contents
Getting started
Near end camera control
Tap More ...
Far end camera control (in a call only)
This works in point-to-point as well as in multisite calls, but only on systems with remotely controllable cameras.
Tap the name
along the bottom line ...
Using Touch Tones (DTMF) in a call
Sometimes you may be urged to enter touch tones (DTMF) during a call, typically to reach extensions or to provide a pin code.
Tap Touch Tones ...
D14582.07
User guide Profile Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Placing calls
Using directories
... then tap
Camera Control.
... then tap
Camera Control.
Use the touch tone keypad.
In-call features
In-call features
Adjust zoom and pan as required.
Tap Back to exit.
Adjust zoom and pan as required.
Tap Back to exit.
Tap anywhere outside it to exit.
24
User guide
Settings
Contact us
Near end camera presets
During a call,
or outside a call, tap More ...
... then tap Camera Control.
Tap an existing preset to make the camera move
accordingly. To define presets, see
"Adding a
near end camera preset" on page 6.
www.cisco.com