DigiTech JamMan Express XT Kullanıcı El Kitabı - Sayfa 15
Müzik Pedalı DigiTech JamMan Express XT için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. DigiTech JamMan Express XT 18 sayfaları. Stereo looper w/jamsync
Sayfayı Yazdır
record to the slave and instead wish to record to the slave at a later time in the song�
When using this method, you must arm the slave to record before the master device
reaches its loop start point� It's at this loop start point that the master will send the
record command to the slave device(s), so the slave device must be armed in advance
to receive the record command�
• Sequential Slave Recording Method
Using this method, you can record to a JamSync slave immediately upon setting the
loop end point of the master� Use this method when you want to immediately begin
recording to the slave device after recording to the master device�
To record using the Manual Slave Recording Method:
1� Press the
FOOTSWITCH
solid red and recording will begin�
2� When finished recording to the master, press the
end point� The phrase will automatically begin playing back in a repeating loop and the
will light solid green�
PLAY LED
3� Press the
FOOTSWITCH
will begin once the master makes another pass of its loop start point (the
light solid red on the slave device when recording begins )� Once recording has begun,
play your part�
4� When finished recording to the slave, press the slave's
loop end point� The phrase will automatically begin playing back along with the master
loop and the
PLAY LED
5� Press the
FOOTSWITCH
both devices�
To record using the Sequential Slave Recording Method:
1� Press the
FOOTSWITCH
slave is armed for recording�
2� Press the
FOOTSWITCH
solid red and recording on the master will begin�
3� When finished recording to the master, press the master
the loop end point� The master device's recorded phrase will begin playing back and the
armed slave device will immediately begin recording, indicated by the slave's
lighting solid red�
on the master device and begin playing� The
on the slave device to arm the slave for recording� Recording
will light solid green�
on the master device 2 times quickly to stop loop playback on
on the slave device� The
on the master device and begin playing� The
once to set the loop
FOOTSWITCH
FOOTSWITCH
will flash red, indicating the
REC LED
FOOTSWITCH
will light
REC LED
will
REC LED
once to set the
will light
REC LED
once to set
REC LED
9