Cisco TelePrescence SpeakerTrack 60 Manuel - Sayfa 16

Konferans Sistemi Cisco TelePrescence SpeakerTrack 60 için çevrimiçi göz atın veya pdf Manuel indirin. Cisco TelePrescence SpeakerTrack 60 22 sayfaları.

Sayfayı Yazdır
Cisco TelePrescence SpeakerTrack 60 Manuel
Cisco TelePresence Precision 60 and SpeakerTrack 60
Contents

Precision 60

A factory reset should only be performed by a system admin-
istrator or in contact with Cisco technical support.
The camera will be reset to factory defaults, and all configuration
and logs will be erased.
It is not possible to undo a factory reset.
To perform a factory reset:
1. Locate the pin hole button at the back of the camera.
2. Use a pen or similar to press and hold the factory reset
button for 10 seconds.
3. The camera LED will be lit red during the factory reset.
Do not unplug power.
4. When the factory reset is complete, the camera restarts and
the camera LED lights up.
D15296.03 Cisco TelePresence Precision 60 and SpeakerTrack 60, APRIL 2016.
Introduction
Physical interface
Connecting the camera
P i n-h o l e fo r
factory reset
16
Camera guide
Factory reset
Factory reset
Appendix
Copyright © 2016 Cisco Systems, Inc. All rights reserved.