DigiTech Obscura Kullanıcı El Kitabı - Sayfa 4

Müzik Pedalı DigiTech Obscura için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. DigiTech Obscura 18 sayfaları. Stereo delay pedal altered delay

Sayfayı Yazdır

USER INTERFACE

1. Tails Switch

When this switch is set to the ON position, delay tails will decay naturally when the effect is

switched to bypass. When set to the OFF position, delay decays will end abruptly when the effect is

switched to bypass. When the Tails Switch is set to ON, the Obscura does not utilize true hardwire

bypass. If you always want to use true hardwire bypass, set the Tails Switch to the OFF position.

2. DC Power Jack

Connect the specified Harman power supply (sold separately) to this jack. Be sure to use the proper

power supply for your area's mains line voltage. See 'Specifications' on page 14 for power supply

model information. The Obscura can only be powered using the external power supply.

3. Delay Type Selector Knob

Selects from the following delay algorithm types:

• ANALOG - Classic sound of a vintage bucket brigade analog delay circuit.

• TAPE - Emulates a classic tube tape echo.

• LO-FI - A low-fidelity delay that has limited bandwidth and reduced bit-depth to approximate

the effects of low sample rate and 8-bit signal processing used in vintage digital delays.

• REVERSE - A delay where the repeats are played backwards. No dry signal is present when

REVERSE is selected.

4. Tone Knob

Adjusts the frequency response of the delay effect, making it brighter or darker in tone.

1 2