Cisco TelePresence DX80 Kullanıcı Kılavuzu - Sayfa 17

Konferans Sistemi Cisco TelePresence DX80 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco TelePresence DX80 33 sayfaları. Touchscreen mbtelehealth a shared health service
Ayrıca Cisco TelePresence DX80 için: Kurulum Kılavuzu (6 sayfalar), Kullanıcı Kılavuzu (48 sayfalar), Kullanıcı Kılavuzu (48 sayfalar), Kullanıcı Kılavuzu (40 sayfalar), Kullanıcı Kılavuzu (14 sayfalar), Kullanıcı Kılavuzu (40 sayfalar), Manuel (43 sayfalar), Kurulum (2 sayfalar), Hızlı Referans Kılavuzu (3 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (8 sayfalar)

Sayfayı Yazdır

Cisco TelePresence DX80 Kullanıcı Kılavuzu

Conference Calls with Multiple Participants

Add Additional Participants to Existing Call

Assume that you already are in

a call. This call may have been

initiated by you or by someone

else (someone called you). Tap

Add.

This new call will now be

added to the existing.

This is an optional feature that may, or may not, be available for your system.

Locate whom to call, in the

usual way.

You have now established a

conference.

You may repeat this procedure

to the extent permitted by your

video infrastructure.

Place the call, in the usual way.

You may alter the Call settings

of that call before you place

it—see side bar for more.

About Video Conferences

Your video system network may

be equipped with the capability to

initiate a video conference with

several participants.

The maximum number of participants

supported by your video system will

depend on system configuration and

the video infrastructure. If in doubt,

contact your video support team.

If you want to initiate a video

conference, you must call each

participant one by one.

If you are the one who initiated

the conference you will be able to

terminate the entire conference.

The other participants may only

disconnect themselves from the

conference.

Call settings. Those you call may

have video systems with different

bandwidths. You are not constrained

to set all participants to a bandwidth

that all systems support. The Call

rate may be set individually for all

participants in order to provide

everyone with the best quality

available for their system. See

"Change Call Rate" on page

14.

D1510413 User Guide

Cisco TelePresence DX70, DX80

Produced: April 2016 for CE8.2