Argo DD DCI Series Kullanım Talimatları Kılavuzu - Sayfa 7

Klima Argo DD DCI Series için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Argo DD DCI Series 15 sayfaları. Air conditioner without outdoor unit

Sayfayı Yazdır

NOTE

Use DRY operation when you want to reduce the humidity

in the room.

Once the room temperature reaches the set level, the unit

repeats the cycle of turning on and off automatically.

During DRY operation, the fan speed is automatically

set (Remote control lamp

overcooling.

Dry operation is not possible if the indoor temperature is

10 °C or less.

FAN ONLY

If you want to make air circulate without any temperature

control, press

button until only the

appears on the display.

ADJUSTING THE FAN SPEED

AUTOMATIC

Simply set the FAN selector to the

microcomputer automatically controls the fan speed when

the AUTO mode is selected. When the air conditioner

starts operating, in heating or cooling, the fan speed varies

(high - medium - low - very low) according to the thermal

load of the room.

NOTE

The automatic speed is not available in FAN ONLY mode.

MANUAL

If you want to manually adjust speed just set the FAN

selector as desired.

High speed

Med. speed

NIGHT MODE

1. Set the

2. Press the

button.

3. The

mark appears on the display. Press the

button again to release the function.

What does the NIGHT mode mean?

When you select the NIGHT mode, the air conditioner

automatically limits the power supplied to increase comfort

during the night.

NOTA

During the NIGHT mode the internal fan speed is

automatically lower and reduces the noise.

is ON) to prevent

fan symbol

position.A

Low speed

selector to cool, dry or heat.

HIGH POWER MODE

You can select High Power only during cooling or heating

mode and not during automatic, dehumidifying (dry) and fan

mode. High Power mode allows to obtain the maximum air

conditioner's efficiency, either in cooling or heating mode

(heat pump). The user can choose to activate the High

Power mode, using the remote control unit, after having

selected cooling or heating mode. Under these conditions

the air conditioner will reach its maximum thermal power;

it is recommended to use the High Power mode only if the

outdoor temperature is extreme and the selected room

temperature is difficult to be reached. On the contrary, if

you want to obtain the best performance in efficiency and

silentness, High Power mode is not recommended: let

the air conditioner run in normal condition (factory default

program).

To activate High Power mode it is necessary (after having

selected the cooling or heating mode) to press the HIGH

POWER button

so that the symbolo

NOTE

HIGH POWER program remains set also if you change

operation mode from COOL to HEAT or vice versa and

if you switch OFF and ON again the air conditioner.

appears.