ACU-RITE 00606 Kullanım Kılavuzu - Sayfa 3

Termometre ACU-RITE 00606 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ACU-RITE 00606 4 sayfaları.

Sayfayı Yazdır

(SECTION

3 • PLACEMENT

)

Now that setup is complete, you must choose a location to place the wireless

sensor and the main unit. The wireless sensor MUST be placed less than 100

feet away from the main unit.

This wireless thermometer uses radio frequency for communication, which is

susceptible to interference from other electronic devices and large metallic

items or thick walls. Always place both units at least 3 feet away from

appliances

TV, microwave, radios, computers, etc.

or objects that may

interfere with the wireless communication

large metal surfaces, thick stone

walls, etc. ].

--'01'.,.

- -

,; I \'

100 feet maximum

Placement of Main Unit

Place the main unit in a dry area free of dirt and dust. To help ensure

an accurate indoor temperature measurement, be sure to place the

main unit out of direct sunlight, and away from any heat sources or

vents in your home. There are 2 placement options for the main unit.

You may hang the main unit on a wall using the integrated hang hole.

Alternatively, you may place the main unit on a table top or other flat

surface.

Placement of Sensor

The wireless sensor MUST BE PLACED OUTDOORS to observe

outdoor temperatures. The wireless sensor must be placed less than

100 feet from the main unit.

The wireless sensor is water resistant and is designed for general

outdoor use. However, to extend the life of the product, place the

wireless sensor in an area protected from direct weather elements.

To ensure an accurate outdoor temperature measurement, be sure

the wireless sensor is placed out of direct sunlight and away from any

heat sources.

There are 2 placement options for the wireless sensor. You may hang

it on a wall using one of the two integrated hang holes, or use string

[not included] to hang it from a suitable location like a well covered

tree branch.

Troubleshooting

Problem

Possible Solution

Bad

Wireless Sensor

Reception

( no temperature reading)

• Make certain that the batteries are installed

correctly into the wireless sensor. The

wireless sensor batteries may need

replacing.

• Relocate the main unit and/or the wireless

sensor. Both units must be within 100 feet

from each other.

• Make sure both units are placed at least 3

feet from other electronic appliances and

devices that may interfere with the wireless

communication [such as TV's, microwaves,

radios, computers etcl.

• Make certain there are no large metallic

Tull

-out

1..olllll

no bars

12:35pm

surfaces or very thick stone walls or surfaces

between the wireless sensor and the main

unit.

,noF.

• Metal screens or LOW-E windows may

interfere with the wireless communication.

• In some cases, relocating AND resetting

the main unit and wireless sensors

[removing and re-installing batteries) may be

necessary.

NOTE: It may take up to 20 minutes for the

main unit to re-synchronize with the sensor

when batteries are replaced. Use lithium

batteries in sensor when temperature is

below -4°F.

Main Unit

Display Not Working

Make certain that the batteries are installed

correctly. The batteries may need replacing.

Please DO NOT return

product to the retail store.

For technical assistance and product return information, please call

Customer Care:

877-221-1252

Mon. - Fri. 8:00 A.M. to 4:45 P.M. (CST]

www.chaneyinstrument.com

- 5 -