DigiTech Screamin' Blues Manuel - Sayfa 7

Müzik Pedalı DigiTech Screamin' Blues için çevrimiçi göz atın veya pdf Manuel indirin. DigiTech Screamin' Blues 12 sayfaları. Overdrive/distortion

7. Pedal Release Pins

These two pins are spring-loaded hinges that hold the pedal in place.

Push these pins in to release the pedal from the chassis exposing the

battery compartment. (See battery replacement diagram.)

8. Pedal

Press the pedal to turn the effect on and off.

9. Out 1(Amp) Jack

Connect this output to your guitar amplifier.

10. Indicator LED

This LED indicates when the effect is turned on. If the LED becomes

dim or does not light when the cables are connected, the battery needs

to be replaced.

11. Out 2 (Mixer) Jack

This output features DigiTech's speaker cabinet compensation, that lets

you run the pedal directly into a mixer or recorder input without having

to use a guitar amplifier.