DigiTech TONE DRIVER Manuel - Sayfa 7

Müzik Pedalı DigiTech TONE DRIVER için çevrimiçi göz atın veya pdf Manuel indirin. DigiTech TONE DRIVER 13 sayfaları. Overdrive

7. Pedal Release Pins

These two pins are spring-loaded hinges that hold the pedal in place.

Push these pins in to release the pedal from the chassis exposing the

battery compartment. (See battery replacement diagram.)

Turns the effect on and off.

Connect this output to your guitar amplifier.

Indicates when the effect is turned on. If the LED becomes dim or does

not light when the cables are connected, the battery needs to be

replaced.

11. Out 2 (Mixer) Jack

This output features DigiTech's CIT™ cabinet modeling technology, that

lets you run the pedal directly into a mixer or recorder input without

having to use a guitar amplifier.