Cisco TelePresence MX700 Manuel - Sayfa 35

Konferans Sistemi Cisco TelePresence MX700 için çevrimiçi göz atın veya pdf Manuel indirin. Cisco TelePresence MX700 45 sayfaları. Single camera on a free standing floor stand or a floor stand secured to the wall
Ayrıca Cisco TelePresence MX700 için: Kurulum Kılavuzu (32 sayfalar), Hızlı Başlangıç Kılavuzu (12 sayfalar), Kurulum Kılavuzu (28 sayfalar), Kurulum Kılavuzu (29 sayfalar), Kurulum Kılavuzu (32 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Manuel (45 sayfalar), Kurulum Kılavuzu (29 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Başlangıç Kılavuzu (46 sayfalar)

Cisco TelePresence MX700 Manuel

Troubleshooting

Table of contents
Development tools on the web interface
Introduction
Sign in to the video system's web interface with administrator
credentials, navigate to
Create a user interface
to show the Development Tools.
API for in-room control
Overview of all widgets and their status
The Widget State Overview window lists all widgets, and their status.
Widgets
The status is shown in the Current Value column.
If the Current Value column is empty, the widget has not been
initialized and has no value. We recommend that the control system
Command reference
initializes all widgets when it initially connects to the video system.
Troubleshooting
Troubleshooting
Tips and tricks
Examples
In-Room Control on Touch 10
for Cisco TelePresence
MX200 G2, MX300 G2,
MX700, MX800,
SX10, SX20, SX80
Collaboration Endpoint
software version CE8.2
D15358.02 - JULY 2016
www.cisco.com
© 2016 Cisco Systems, Inc.
All rights reserved.
Widget status
Integration > In-Room
Control. Click the arrow
Send value updates to the video system
A control system sends
SetValue
telling it to update a widget. For test purposes, you can use the
Update Value column in the Widget State Overview window to
simulate a control system.
Enter a value in one of the input fields to immediately send the
corresponding
command to the video system. The
SetValue
CurrentValue column (status) will be updated, and the Touch 10 in-
room control panel changes accordingly.
Click
Unset
to clear the value of the widget (send an
command).
If a control system is connected to the video system, the Current
Value and Update Value columns may come out-of-sync. The Current
Value column always shows the current status, regardless of whether
the
command is sent from a real control system, or from
SetValue
the Update Value column.
35
commands to the video system,
UnsetValue
Send command to
update widget