Cisco Telepresence MX800 Manuel - Sayfa 18

Konferans Sistemi Cisco Telepresence MX800 için çevrimiçi göz atın veya pdf Manuel indirin. Cisco Telepresence MX800 45 sayfaları. Wall-mounted mx800 single
Ayrıca Cisco Telepresence MX800 için: Hızlı Başlangıç Kılavuzu (12 sayfalar), Kurulum Kılavuzu (16 sayfalar), Değiştirme Kılavuzu (46 sayfalar), Değiştirme Kılavuzu (47 sayfalar), Kurulum Kılavuzu (30 sayfalar), Yedek Parçalar (24 sayfalar), Kurulum Kılavuzu (16 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Manuel (45 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Başlangıç Kılavuzu (46 sayfalar)

Sayfayı Yazdır
Cisco Telepresence MX800 Manuel
Commands and statuses
Table of contents
The
SetValue
working with in-room controls:
Introduction
xCommand UserInterface Extensions Widget SetValue Value:
Create a user interface
When the video system receives a
status and the Touch 10 in-room control panel are updated accordingly.
API for in-room control
API for in-room control
It is important that the control system sends
following situations, so that the Touch 10 in-room control panel truly reflects the
status of the room:
Widgets
• When the control system initially connects to the video system.
• When the video system restarts.
Command reference
• When the control system restarts.
• When a new in-room control panel is exported to the video system from the
Troubleshooting
in-room control editor (as response to the LayoutUpdated event).
• When someone physically changes something in the room, for example turns
on the lights using a wall control.
Tips and tricks
• As a response to an event, for example when someone has tapped the
Lights On button on the Touch 10 in-room control panel.
Examples
The control system must also do all that is necessary in the room to reflect
the action on the Touch 10 in-room control panel, for example switch on the
light.
Consult the
the different widgets (user interface elements).
D15358.01 APRIL 2016
Collaboration Endpoint software
version 8.1
© 2016 Cisco Systems, Inc.
All rights reserved.
command, which sets the value of a widget, is essential when
WidgetId
WidgetId:
command, the video system's
SetValue
SetValue
Widgets
chapter for more details about which commands apply to
Examples
User
Value
commands in the
User
18
Video system
with Touch 10
Tap Lights On
Pressed and
Released events for
Lights On widget
Set the value of the
Lights On widget to
active
The appearance of
the light widget has
changed to match
what the user can
see in the room
Message flow - turn on the lights using the controls on Touch 10
Video system
Control
with Touch 10
system
Signal that lights
Set the value of
are on
the Lights On
widget to active
The appearance
of the light
widget has
changed to
match what the
user can see in
the room
Message flow - turn on the lights using the wall control
Control
system
Lights
Turn lights on
Lights
User
Turn lights on
with wall control