Cisco Telepresence MX800 Manuel - Sayfa 7

Konferans Sistemi Cisco Telepresence MX800 için çevrimiçi göz atın veya pdf Manuel indirin. Cisco Telepresence MX800 45 sayfaları. Wall-mounted mx800 single
Ayrıca Cisco Telepresence MX800 için: Hızlı Başlangıç Kılavuzu (12 sayfalar), Kurulum Kılavuzu (16 sayfalar), Değiştirme Kılavuzu (46 sayfalar), Değiştirme Kılavuzu (47 sayfalar), Kurulum Kılavuzu (30 sayfalar), Yedek Parçalar (24 sayfalar), Kurulum Kılavuzu (16 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Manuel (45 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Başlangıç Kılavuzu (46 sayfalar)

Cisco Telepresence MX800 Manuel
Create a user interface for the Touch 10
Table of contents
Use our in-room control editor to create customized panels for peripheral
controls on the video system's Touch 10 user interface.
Introduction
Create a user interface
Create a user interface
Connected to video system
If you have access to the video system, you can launch the editor from the
API for in-room control
video system's web interface. Then you have immediate access to the video
system and its Touch 10 user interface.
Widgets
If there is already an in-room control panel on the Touch 10, it will automatically
load into the editor, and you can use it as a starting point for your design.
Command reference
When you push a new panel to the video system, you will immediately see the
result on the Touch 10.
Troubleshooting
Tips and tricks
Examples
D15358.01 APRIL 2016
Collaboration Endpoint software
version 8.1
© 2016 Cisco Systems, Inc.
All rights reserved.
Touch 10
Video system
Import existing in-room control
Push new in-room control
panel from video system
panel to video system
Import an
in-room control
panel from file
In-room
control
editor
Export new
in-room control
panel to file
In-room control editor launched from the video system's web interface
Offline
There are two places from which you can download the offline editor:
• Download from
http://www.cisco.com/go/in-room-control-docs
• Or, sign in to a video system's web interface with administrator credentials,
navigate to
Integration > In-Room
Extract the files from the downloaded zip-file. Keep the folder structure as is.
With the offline editor you have to work with files, rather than communicating
directly with the video system and Touch 10. Apart from this, the offline editor
has full functionality.
The editor that you launch from the video system's web interface and the offline
editor share the same file format, so files created in one version can be opened
and modified in the other.
Import an
in-room control
panel from file
Export new
in-room control
panel to file
Offline in-room control editor
7
Control, and click
Download
Editor.
Offline
in-room
control
editor