Cisco Telepresence MX800 Başlangıç Kılavuzu - Sayfa 28

Konferans Sistemi Cisco Telepresence MX800 için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Cisco Telepresence MX800 46 sayfaları. Wall-mounted mx800 single
Ayrıca Cisco Telepresence MX800 için: Hızlı Başlangıç Kılavuzu (12 sayfalar), Kurulum Kılavuzu (16 sayfalar), Değiştirme Kılavuzu (46 sayfalar), Değiştirme Kılavuzu (47 sayfalar), Kurulum Kılavuzu (30 sayfalar), Yedek Parçalar (24 sayfalar), Kurulum Kılavuzu (16 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Manuel (45 sayfalar), Manuel (45 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar)

Sayfayı Yazdır
Cisco Telepresence MX800 Başlangıç Kılavuzu
Cisco TelePresence Video Systems
Contents

Setting the system/codec password

You need a user name and a password to sign in to the web
and command line interfaces of your system. You also need
the system password to access the administrator settings on
the Touch controller.
The video conference system is delivered with a default user
account with the user name
admin
and no password set. This
user has full access rights to the system.
A warning on the screen of your video system indicates if no
administrator password is set. To remove the warning, you must
set an administrator password.
NOTE:
We strongly recommend that you set a password for the
admin
user to restrict access to system configuration.
Make sure to keep a copy of the password in a safe place. You
have to contact your Cisco representative, if you have forgot-
ten the password.
1. Click your user name in the upper right corner, and select
Change
password.
2. Enter the
Current
password, the
New
the new password in the corresponding input fields.
The password format is a string with 0–64 characters.
If a password is not currently set, use a blank
password.
3. Click
Change
password.
Back to task overview
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Introduction
User interfaces

Setting the menu password

Initially, no menu password is set to restrict access to the
Administrator menu on the on-screen menu. After you set up
a menu password, you need to enter it to configure the video
system, when using a remote control.
The Administrator Settings menu password cannot be set using
the Touch controller.
NOTE:
We strongly recommend that you define a password to
protect the Administrator Settings menu, because these settings
affect the behavior of the video conference system.
1. Go to the
2. Click the text
the upper right corner.
3. Enter the menu password in the
4. Click
Save
5. The link text in the upper right corner should now say
Change Administrator Settings menu
password, and repeat
Current
Configuration
Configuration
Configuration
tab and select
System
Configuration.
Set Administrator Settings menu password
Password
field.
to confirm the change.
password.
28
Appendices
in
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Contacts