DigiTech RPX400 Yazılım Kurulum Kılavuzu - Sayfa 11
Bilgisayar Donanımı DigiTech RPX400 için çevrimiçi göz atın veya pdf Yazılım Kurulum Kılavuzu indirin. DigiTech RPX400 12 sayfaları. Usb drivers and software installation guide
Ayrıca DigiTech RPX400 için: Manuel (6 sayfalar), Sorun Giderme Kılavuzu (6 sayfalar)
Sayfayı Yazdır
X-Edit is now installed on your computer. If you disabled or un-installed your antivirus
software, you can now reinstall or re-enable it. If you want to edit presets, make sure
that the RPx400 is powered on and connected to your computer with the USB cable.
Then you can start X-Edit.
E. Setting Up the RPx400 MIDI
1. Start Pro Tracks. The first time Pro Tracks is started, the Wave Profiler utility will
check and configure you current audio I/O devices. Click OK when these tests
have finished.
2. When prompted to register your Pro Tracks software, please take the time to fill
out the registration information.
3. If the Tip of the Day window appears, click Close.
4. If no previous MIDI outputs have been selected, the No MIDI Outputs Selected
window will appear. Click Choose MIDI Outputs Now button. The MIDI
Devices window will open. If the No MIDI Outputs Selected window does not
appear, go to the Options>MIDI Devices menu option.
5. Under both Inputs and Outputs, choose RPx400 USB MIDI. Do not select
DigiTech USB X-Edit or any other available selections. Click the Move
Selected Devices to Top button.
6. Click the OK button and the window will close.
7. If the Quick Start window appears, click the Close button.
F. Setting Up the RPx400 for Hands-Free Recording
1. From the Pro Tracks menu bar, select Options>Control Surfaces. The Control
Surfaces window will appear.
2. Click the yellow + button to add a new control surface. The Control Surface
Settings window will open.
3. In the Control Surface pull-down menu, select DigiTech RPx. Verify that the
Input and Output port settings still have RPx400 USB MIDI selected. If they do
not, do this now.
4. Click the OK button. DigiTech RPx should now be displayed as the Connected
Surface in the Control Surfaces Window.
5. Click the Close button.
Pro Tracks can now respond to the RPx400 for automated recording functions.
G. Setting up Pro Tracks for RPx400 Audio
1. From the Pro Tracks menu bar, select Options>Audio. The Audio Options
window will appear. Click the Drivers tab.
2. Under the Input Drivers settings, select DigiTech USB 1-2 In/Out and DigiTech
USB 3-4 In Only and deselect all other options.
3. Under the Output Drivers settings, select DigiTech USB 1-2 In/Out and deselect
all other options. DO NOT select DigiTech USB 3-4 Input Only.
4. Click the OK button.