Sony BRC-Z700 - CCTV Camera Komut Listesi - Sayfa 6
Video Kamera Sony BRC-Z700 - CCTV Camera için çevrimiçi göz atın veya pdf Komut Listesi indirin. Sony BRC-Z700 - CCTV Camera 28 sayfaları. Three 1/4-inch clearvid cmos ccd sensors hd robotic camera
Ayrıca Sony BRC-Z700 - CCTV Camera için: Broşür ve Teknik Özellikler (8 sayfalar), Teknik Özellikler (8 sayfalar), Broşür (8 sayfalar), Broşür (8 sayfalar), Hızlı İşaret Kılavuzu (2 sayfalar)
VISCA Device Setting Command
Before starting control of the BRC-Z700, be sure to send
the Address command and the IF_Clear command using
the broadcast function.
For VISCA network administration
•
Address
Sets an address of a peripheral device. Use when
initializing the network, and receiving the following
network change message.
•
Network Change
Sent from the peripheral device to the controller when
a device is removed from or added to the network. The
address must be re-set when this message is received.
Packet
Address
88 30 01 FF
Network Change
X0 38 FF
X = 9 to F: BRC-Z700 address + 8
VISCA interface command
•
IF_Clear
Clears the command buffers in the BRC-Z700.
When cleared, the operation currently being executed
is not guaranteed.
Command Packet
IF_Clear
8X 01 00 01 FF
IF_Clear (broadcast)
88 01 00 01 FF
X = 1 to 7: BRC-Z700 address (For inquiry packet)
X = 9 to F: BRC-Z700 address +8 (For reply packet)
VISCA interface and inquiry
•
CAM_VersionInq
Returns information on the VISCA interface.
Inquiry
Inquiry Packet Reply Packet
CAM_VersionInq 8X 09 00 02 FF Y0 50 GG GG HH HH JJ JJ KK FF GGGG = Vender ID
X = 1 to 7: BRC-Z700 address (For inquiry packet)
X = 9 to F: BRC-Z700 address +8 (For reply packet)
6
Note
Always broadcasted.
Reply Packet
Note
X0 50 FF
88 01 00 01 FF
Description
(0001: Sony)
HHHH = Model ID
0501: BRC-H700
0502: BRU-H700
0505: BRC-Z700
JJJJ = ROM revision
KK = Maximum socket # (02)