Sony CCD-TR440PK Servis Kılavuzu - Sayfa 5

Video Kamera Sony CCD-TR440PK için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Sony CCD-TR440PK 22 sayfaları. Video camera recorder

Sony CCD-TR440PK Servis Kılavuzu
Note on Standby
mode
If you leave the camcorder
for 5 minutes
or more _ith
a cassette inserted in Standby
mode, the
camcorder
goes off automatically.
This prevents wearing do_'n the battery
and weanng
out the tape. To
resume
Standby
mode, turn STANDBY
down once and turn it up again. To start recording,
press
START/STOP.
To Focus the Viewfinder
Lens
If the xdewfinder is not in focus at all or when you use the camcorder after someone else has used it,
focus the viewfinder lens. Turn the viewfinder lens adjustment ring so that the indicators
in the
viewfinder come into sharp focus.
STBY 0:00:00
,,e
Note
on the
indicators
in the
vlewfinder
The indicators
appear
in CAMERA
mode
only.
They
do not appear
in PLAYER
mode.
Recording
with
the START/STOP
button
depressed
You can also make recording
while
pressing
down the START/STOP
button. To make the START/STOP
button work
this way, slide the START/STOP
MODE
switch to
_l . [a]
Shooting scenery in several short
takes
You can automatically make recording forabout 5 seconds with the 5 SEC (p.25).To make the START/
STOP button work this way, slide the START/STOP
MODE
switch to 5 SEC. [b]
[a]
[b]
START/STOP MODE
,,_,..1111
IL-
5
SEC
s o0
-----ii
ii i=------
5
SEC
Note on recording
When
you record from the beginning of the tape, run the tape forabout 15 seconds before actual
recording.This prevents the camcorder from missing any start-upscenes when
you play back the tape.
Notes on recording mode
• This camcorder records in the SP mode
(approximately 19/32 inch (1.43 crn)/second) and in the LP
mode
(approximately 5/16 inch (0.72crn)/second) (p.27) and can play back in the SP mode and LP
mode. The playback quality in the LP mode, however, willnot be as good as that in the SP mode.
• When
a cassetterecorded on thiscamcorder in LP mode isplayed back on other types of 8 mm
camcorders or VCRs, the playback quality may not be as good as thaton thiscamcorder.
Notes on the tape counter
* The tape counter indicatesthe recording time. Use itas a guide. There will be a time lag of several
seconds from the actual time.To set the counter to zero,press COUNTER
RESET located below the
viewfinder.
• Ifthe tape isrecorded in SP and LP modes mixed, the tape counter shows incorrectrecording time.
When
you intend to edit the tape using the tape counter, record in same (SP or LP) mode.
on beep
sound
Note
As indicated
with _ in the ll]UstTations,
a beep sounds when
you turn the power
on or when you start
tM
recording
and two beeps
sound
when
you stop recording,
confirming
the operation.
Severa]
beeps
also
o
sound
as a warning
of any unusual
condition
of the camcorder
(p. 49). Note
that the beep sound
is not
recorded
on the tape. If you do not want
to hear
the beep sound,
set BEEP
to "OFF"
(p. 27).
Note
on the AUTO
DATE feature
The clock is set to the East Coast Standard
Time
at the factory.
You can reset the clock (p. 31).
The Ab_I'O DATE
feature works
once a day. However,
the date may automatically
appear more than
once a day when:
- you reset the date and time.
- you e_=ct and insert the cassette again.
- you stop recording
within
10 seconds.
When
moving
from
indoors
to outdoors
(or vice versa)
Turn STANDBY
up and point
the camcorder
at a white
object for about
15 seconds so that the white
balance isproperly adjusted.
12
13