DigiTech XC-0366 Kullanıcı Kılavuzu - Sayfa 5
Hava İstasyonu DigiTech XC-0366 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DigiTech XC-0366 8 sayfaları. Wireless weather station with outdoor sensor
Sayfayı Yazdır
Temperature Alert Setting:
You can program your weather station to sound an alert whenever the outdoor
temperature exceeds the upper or lower pre-set limit. The temperature alert
can be set for all remote channels. When setting the alert temperatures, the
display will change in increments of 1°C. The low temperature alert setting
must be at least 1°C below the high temperature alert setting.
- Press and hold the 'ALERT' button for 2 seconds until the outdoor
temperature is flashing.
- Press 'CHANNEL' to select the channel on which you would like to set the
alert.
- Press + or – to set your desired high temperature alert level.
- Press 'ALERT' to confirm your setting and the icon for low temperature limit
will be flashing on the display.
- Press + or – to set your desired low temperature alert.
Press 'ALERT' to confirm the setting.
Note: When the temperature reaches the high or low limit, there will be an
audible signal and the outdoor temperature will be flashing on the screen. As
long as the temperature exceeds the pre-set limit, the display will continue to
flash and the alert will sound every 60 seconds.
- To deactivate the temperature alert, press 'ALERT'. The icon for high or low
alert symbols will stop flashing on the display.
Pressure Display Selection:
Press + to select either inHg (inches of mercury) or hPa (hectopascals). Note
that this reading is based on your local conditions and is not adjusted for sea
level.
Barometric Pressure History:
The bar graph on your weather station displays barometric pressure history for
the prior 12 hours. The column to the right shows the current pressure. Moving
to the left are the prior time periods, beginning with -1 hour, then -2 hours, -3
hours, -6 hours and -12 hours.
Weather Forecast:
The weather icon on the LCD display will indicate the predicted weather
condition for the next 12 hours. The forecast is based on temperature,
humidity and pressure data collected over the previous 12 hours. Barometric
pressure data must be accumulated by your weather station for 12 hours
before the weather forecast/weather icon function is operational. The station
uses five different symbols: Sunny, Partly Cloudy, Cloudy, Rainy & Stormy.
Weather Forecast Icon Setting:
Press and hold the 'HIS' button for 2 seconds until the weather forecasting icon
is flashing on the display. Use the + button to modify the 5 icons: Sunny,
Partly Cloudy, Cloudy, Rainy & Stormy. Press the 'HIS' button again to confirm
your setting and to end the setting procedure.