Cable-Tronix CTADM-806a Kurulum Kılavuzu - Sayfa 4

Modülatör Cable-Tronix CTADM-806a için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Cable-Tronix CTADM-806a 6 sayfaları. Rack mount agile audio/video demodulator

Sayfayı Yazdır

1. UNPACKING and HANDLING

Each unit is shipped assembled and factory tested.
Ensure that all accessories are removed from the container before discarding packing material

2. MECHANICAL INSPECTION

Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is
clean, and no connectors are broken, damaged, or loose. If equipment appears to be damaged
or defective please contact your distributor or Cabletronix at 1-610-429-1511 for assistance.
3. PRODUCT DIAGRAM
FRONT and REAR PANELS
1
Power on LED
2
Channel Number Display
3
Mode LEDs
4
Mode Selector Switch
5
Channel Up and Down Switches
6
RF In
7
Video Out
8
I.F, Out (45.75 MHz)
9
4.5 MHz Output
10
MPX Out
11
Audio Output
12
Convenience Outlet
13
Power Cord
11
Power on when lit
Indicates demodulated channel
Indicates operative mode: TV, Standard CATV, CAT/IRC, or
CATV/HRC
To select operative mode
To select upper or lower channels
RF input signal from antenna or cable line
Baseband video signal connected to the video input of a
modulator or TV monitor
Sample I.F. output to monitor the tuner and for use with up
converters
Audio output for stereo applications using a BTSC stereo
generator
Non-de-emphasized audio signal as alternate connection for
stereo. Before connecting to the audio input of a modulator, the
pre-emphasis filter on the modulator must be disabled
De-emphasized baseband audio signal
600 watts of AC power for interconnecting other equipment
Three prong type power plug connects to 120 VAC, 60 Hz outlet
4
12
13