Argo Husky Kullanım Talimatları Kılavuzu - Sayfa 5
Klima Argo Husky için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Argo Husky 8 sayfaları. Evaporative air cooler
TIMER viewing ( 1 - 8 h)
COOLER/HUMIDIFIER
viewing
(COOLING/HUMIDIFICATION)
START/SPEED BUTTON:
open the frontal flaps.
Here are the basic settings of the device:
-
Ventilation in NORMAL
-
The frontal flaps are fixed to 127°;
-
The indicator light COOLER
-
The indicator lights TIMER (1H, 2H, 4H, 8H) are off because the timer is not set.
Press the START/SPEED button to select low
OFF BUTTON:
When the appliance is on, press this button to turn off the power. The frontal flaps will close.
COOLER BUTTON (COOLING AND HUMIDIFICATION):
When you press this button the mode "Cooling/Himidification will activate. The correspondant LED will light.
TIMER BUTTON:
Press this button to activate the timer operation for a period of time that goes from 1 to 8 hours: 1H, 2H, 4H and 8H.
It diactivates by pressing the button until the time from the display is gone.
MODE BUTTON: FAN MODE SELECTION (NORMAL, NATURAL, SLEEP).
Press this button once to switch from "Normal"
to "Natural"
. Press the button a secondf time to move to "Sleep"
In each of the 3 modes, it will then be possible to select the desired speed: High
The "Natural" mode has 3 fan levels (1, 2, 3), each with different periods in which the high, medium and low speeds
alternate, in order to create a very natural type of ventilation.
An example of this is illustrated on the graph below.
High speed
Medium speed
Low speed
stop
V 12/15
CONTROL PANEL and AVAILABLE FUNCTIONS
SWING vertical
flaps viewing
When the appliance is off push the START/SPEED button to turn on the appliance and
mode (constant fan speed);
is off;
, medium
mode, activated by default when the START/SPEED button is pressed,
Level 3 – Natural mode at high speed
Display mode of
SWING
horizontal flaps
viewing
and high
.
mode.
Medium
Display speed of
ventilation
ventilation
SLEEP
ALTA
NATURAL
MEDIA
NORMAL
BASSA
or Low
.
13