Cisco TelePresence Touch 10 Kullanıcı Kılavuzu - Sayfa 34
Konferans Sistemi Cisco TelePresence Touch 10 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco TelePresence Touch 10 45 sayfaları. Ce 9.3, systems
Ayrıca Cisco TelePresence Touch 10 için: Kurulum Kılavuzu (6 sayfalar), Kurulum Kılavuzu (12 sayfalar), Kurulum Kılavuzu (2 sayfalar)
Sayfayı Yazdır
Camera
Add Camera Position Preset
1
Tap Camera to invoke the camera
adjustment menu.
4
Key in a descriptive name and tap Save
to put changes into effect.
D1534509 Cisco TelePresence User Guide
Systems using Touch10
Produced: March 2018 for CE9.3
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved
2
Selfview will be activated automatically.
Adjust Tilt, Pan and Zoom, as required.
+
Then tap
Add new.
5
Tap anywhere outside the
menu when you're done.
3
Tap in the text field.
About Camera Presets
Your video system lets you create
predefined zoom and camera
pointing directions (also known as
pan and tilt). Use these to zoom into
the person speaking, if appropriate.
Do not forget to zoom out again
afterwards.
This means that if you want to create
one or more zoom-in presets you
should also create a zoom-out
(overview) preset to conveniently
switch back to overview mode.
Although you may control the far
end camera, i.e. the camera of
any of the other participants (given
that those cameras are remotely
controllable), you cannot define nor
make use of their presets.
34