Cisco 2100 Series Yapılandırma Kılavuzu - Sayfa 15
Ağ Donanımı Cisco 2100 Series için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Cisco 2100 Series 40 sayfaları. Cisco 8500 series
wireless lan controller
Ayrıca Cisco 2100 Series için: Hızlı Başlangıç Kılavuzu (49 sayfalar), Yapılandırma Kılavuzu (50 sayfalar), Hızlı Başlangıç Kılavuzu (12 sayfalar)
Sayfayı Yazdır
Section 1: SVP
PN: 1725-36192-001_H
Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs
Configuration for handsets running in 802.11a
mode
1. From the main menu, click
2. In the navigation pane, under
. All the APs that are connected should be listed, showing
802.11a /n
their
Operational Status
3. Select
from the drop-down list for the access point you
Configure
wish to change.
Global settings for
were not tested. For
Assignment
settings please consult your facility's RF site survey — optimized for
wireless voice traffic — to determine correct power and channel
settings for each AP using non-overlapping channels.
4. Set
to
Admin Status
5. Configure any other settings that might be relevant to your
deployment as needed.
6. Click the
button to save all changes.
Apply
.
Wireless
Access Points
as
.
UP
RF Channel Assignment
Custom Tx Power
.
Enable
click
then select
Radios,
and
Tx Power Level
and
RF Channel
15