Cisco 2100 Series Yapılandırma Kılavuzu - Sayfa 27

Ağ Donanımı Cisco 2100 Series için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Cisco 2100 Series 50 sayfaları. Cisco 8500 series wireless lan controller
Ayrıca Cisco 2100 Series için: Yapılandırma Kılavuzu (40 sayfalar), Hızlı Başlangıç Kılavuzu (49 sayfalar), Hızlı Başlangıç Kılavuzu (12 sayfalar)

Sayfayı Yazdır

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs

Media (Voice/Video)

For 84-Series handsets Admission Control (ACM) must be enabled on both the Voice and Video

AC when the handset is configured for Admission Control Mandatory. PIVOT handsets support

Admission Control on PIVOT R1.5 and later.

To enable Admission Control (ACM):

In the navigation pane under 802.11 b/g/n, select Media, then select the Voice tab.

Select the Admission Control (ACM) checkbox. If CAC Method is available, select

Static from the drop down list. Set the Max RF Bandwidth to 50 for 84- and PIVOT

handsets to limit the bandwidth allocated to handsets to a value tested to provide good

performance. If available, ensure that the Reserved Roaming Bandwidth is set to 6%.

Admin Tip: Use the Static CAC Method.

It is very important to choose the Static CAC method to avoid limiting calls when

there is heavy background traffic.

Admin Tip: Disable WLAN before changing Admission Control settings.

Any WLAN using the network must be disabled before changing Admission Control

settings.

721-1001-000-AH.docx

December 2016