Argo SLIMMY Kullanım Talimatları Kılavuzu - Sayfa 12

Klima Argo SLIMMY için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Argo SLIMMY 13 sayfaları.

The external temperature sensor has

short-circuited.

The temperature and error display lights up only in the COOL mode. In the DRY and FAN modes the display does not light

up.

SAFETY FUNCTIONS

REMOTE CONTROL LOCK

Simultaneously press "+" and "-" to lock the remote control.

The "Lock" icon will light up on the remote control, and the latter will not respond to commands.

SWITCHING BETWEEN °C AND °F.

Press the "-" and "MODE" buttons simultaneously to switch between °C and °F.

WARNING!

Prior to carrying out any cleaning or maintenance, unplug the unit from the power socket.

1. Cleaning the air filters

Use a vacuum cleaner to remove any dust. Should this not

be sufficient, wash the filter with lukewarm water and

neutral detergent (if necessary), rinse it with cold water

then leave it to dry naturally before putting it back in place.

After putting the filter back in place, close the grille and

resume use of the air conditioner.

V 12/15

Contact the service centre.

The air filter must be checked at least

once every two weeks of operation.

Operating with dirty or clogged filters

will decrease the effectiveness of the

air conditioner and can cause serious

problems.

To remove the filter, release the rear

grille then slide out the filter by gently

pulling it sideways.