Argo Softy Kullanım Talimatları Kılavuzu - Sayfa 11
Klima Argo Softy için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Argo Softy 14 sayfaları. Local
Sayfayı Yazdır
(1)ON/OFF BUTTON
Press the ON/OFF button to switch the unit on or off.
When switched on, the appliance will start operating in the last mode set (save function).
(2) TEMPERATURE AND TIMER BUTTON
Increase temperature
1) Allows for adjusting the desired temperature in cooling mode.
2) Whenever the
Decrease temperature
1) Allows for adjusting the desired temperature in cooling mode.
2) Whenever the
The same button is used for setting the TIMER.
(3)MODE SELECTION BUTTON (MODE)
Press this button to select the various operating modes, according to the following sequence:
Cooling (Cool) → Dehumidification (Dry) → Heating (Heat) (enabled only on model Softy plus) → Ventilation (Fan Only) →
Auto
(4) SCREEN BUTTON
Used for switching the LCD on or off.
(5)SLEEP BUTTON
Press this button to activate the Sleep function, which automatically adjusts the temperature to changes in body and
room temperature during the night, for optimal sleeping comfort and minimal consumption.
In cooling mode, the temperature increases by 1 °C in an hour then by 2 °C in two hours, and remains in this setting for
the whole period. The Sleep function is not available in the ventilation, dehumidification and auto modes. When Sleep
function is set, control panel display switches off , to not disturb sleeping in the night.
In heating mode, the temperature decreases by 1 °C in an hour then by 2 °C in two hours, and remains in this setting
for the whole period. The Sleep function is not available in the ventilation, dehumidification and auto modes. When
Sleep function is set, control panel display switches off , to not disturb sleeping in the night.
After 7 hours of operation in SLEEP mode, the air conditioner switches off automatically.
Note: press MODE and ON/OFF together to cancel the SLEEP function setting on the remote control.
(6) FAN SPEED BUTTON (SPEED)
Press this button when the appliance is on to adjust the fan speed to Low, Medium, High or AUTO.
The fan speed cannot be adjusted in DRY mode and is set to low speed.
(7) SWING BUTTON
Press this button to let the horizontal fins swing automatically; after setting the desired fin angle, press the button again
to lock the angle.
(8) FEELING BUTTON
Activates the sensor on the remote control: the word ROOM will appear on the remote control.
The LCD will show the room temperature; when the function is cancelled, it will show the set temperature. This function
is disabled in the FAN mode.
(9) TIMER BUTTON
Select the function from the remote control: the relevant LED will light up.
Press the timer button again on the remote control, without deselecting the LED on the unit.
Next, select the time remaining to on or off.
1）Timer-on (automatic switch-on)
When the appliance is off, this button is used to set a delay after which the unit will switch itself on.
Remote control: Press TIMER. The T-ON and H icons will light up on the remote control. Press the + and -
buttons within 5 seconds to set the delay. The T-ON icon will remain on to indicate that the TIMER is running.
Unit: Press TIMER. Select a number of hours from 0.5 to 24. Press the TIMER button to confirm.
V 10/16
:
button is pressed, the set temperature increases by 1 °C.
:
button is pressed, the set temperature decreases by 1 °C.
25