Sony XDCAM PDW-HR1 Kullanım Kılavuzu - Sayfa 45
Video Kamera Sony XDCAM PDW-HR1 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sony XDCAM PDW-HR1 49 sayfaları. Sxs memory card adaptor
Ayrıca Sony XDCAM PDW-HR1 için: Broşür ve Teknik Özellikler (28 sayfalar), Broşür (4 sayfalar), Kurulum Kılavuzu (16 sayfalar)
Sayfayı Yazdır
Additional Function Menu
Settings
The menu shown in the following table is added when you
install this board in the PDW-HR1 and update the PDW-
HR1 to Version 2.0.
This menu appears as the last page when you press the
SHIFT + EDIT/HYBRID button to put the PDW-HR1 into
hybrid mode.
Underlined values are the factory defaults.
Refer to Chapter 3 "Preparations" in the PDW-HR1
Operation Manual for more information about function
menu operations.
SxS page
Item
Setting
F1: DISPLAY
Specifies whether to superimpose
information such as time data on the
display of the PDW-HR1 and on an
external monitor.
ON: Display
OFF: Do not display
F2: STATUS
Specifies whether to superimpose
the video status or battery and media
status on the display of the PDW-
HR1 and on an external monitor (see
page 44).
ON: Display
OFF: Do not display
F3: SLOT
When recording media is loaded in
both slot A and slot B, specifies
which recording media to use (see
page 12).
A: Select slot A
B: Select slot B
F4: BACKUP
Specifies whether to enable use of
the UserData directory of a disc as
the file backup destination (see
page 31).
ON: Enable use
OFF: Disable use
Additional Setup Menu
Items
When you install this board in the PDW-HR1 and update
the PDW-HR1 to Version 2.0, the sub-item "SxS" is added
to setup menu item 146 POWER SAVE MODE, and the
setting "SxS" is added to item 346 PLAYER SELECT.
Underlined values are the factory defaults.
Refer to Chapter 8 "Menus" in the PDW-HR1 Operation
Manual for more information about setup menu
operations.
Item
Item name
number
146
POWER SAVE
MODE
Sub-item
2
SxS
346
PLAYER SELECT Selects the player (the device
a) Switching to hybrid mode is faster if you select "stby".
Additional Function Menu Settings / Additional Setup Menu Items
Settings
Select whether to put the
PDW-HR1 into power saving
mode when it enters stop
mode, by turning power
supply on or off for each of the
components in the sub-items.
Select whether to supply
a)
power to this board.
stby: Always supply power.
save: Do not supply power
until the PDW-HR1 enters
hybrid mode (power
saving mode).
containing the material clips).
SxS: SxS memory card
inserted into this board.
45