Argo HIFAN digit plus Kullanıcı Kılavuzu - Sayfa 4

Isıtıcı Argo HIFAN digit plus için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Argo HIFAN digit plus 4 sayfaları.

When an overheat temperature is reached, the heater will be automatically shut off.

1. Unplug the heater and wait 5-10 minutes for the unit to cool down.

2. after 5-10 minutes, plug the unit in again and operate normally.

AIR EXIT

WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING. MAINTENANCE

DO NOT IMMERSE HEATER IN WATER.

CLEANING: Clean the filter net at least once a month, more often if dirty. a dirty filter could restrict the air flow and cause the heater

to function improperly or shut down.

Do not attempt to remove inlet grill from the heater.

1. Unplug the heater from power source.

2. Vacuum rear grill area of heater with vacuum brush attachment to remove lint and dirt from internal filter. Do not remove grill guard

or allow heater to be operated without grill guard in place.

3. Clean the body with a soft cloth. (NeVer USe aLCOhOL Or SOLVeNtS.)

STORAGE: Store the heater with these instructions in the original carton in a cool, dry place.

HiFan Digit_EG_2009_v2.indd 4

reSet iNStrUCtiON

maiNteNaNCe

www.argoclima.com

maDe iN ChiNa

V 02/09

SWITCH

AIR INLET

PLUG

29/06/2009 15.25.32