Cisco 7513 Series Bakım - Sayfa 14

Ağ Donanımı Cisco 7513 Series için çevrimiçi göz atın veya pdf Bakım indirin. Cisco 7513 Series 20 sayfaları. Chassis replacement
Ayrıca Cisco 7513 Series için: Hızlı Başlangıç Kılavuzu (44 sayfalar), Değiştirme Talimatları Kılavuzu (26 sayfalar), Veri Sayfası (11 sayfalar), Manuel (30 sayfalar), Değiştirme Talimatları Kılavuzu (19 sayfalar), Değiştirme Talimatları Kılavuzu (22 sayfalar)

Maintenance Procedures for the Cisco 7513, Cisco 7513-MX, and Cisco 7576

Figure 7-11

Carefully guide the cover up and away from the chassis.

Step 3

See the appropriate sections depending on the replacement procedures you need to perform. Then, to

Note

replace the maintenance cover, proceed to Step 4.

Replace the maintenance cover by carefully guiding the cover over the ten screws.

Step 4

Align the cover; then tighten all ten screws that secure it to the chassis.

Step 5

This completes the backplane maintenance cover removal and replacement procedure.

Removing and Replacing the Chassis Interface in the Cisco 7513, Cisco

7513-MX, and Cisco 7576

In the Cisco 7513, Cisco 7513-MX, and Cisco 7576, the chassis interface (CI) (shown in

provides environmental monitoring and logic functions. The Cisco 7513 and Cisco 7513-MX has one

chassis interface, and the Cisco 7576 has two chassis interfaces.

Cisco 7500 Series Installation and Configuration Guide

7-14

Chapter 7

Removing the Cisco 7513, Cisco 7513-MX, and Cisco 7576 Backplane Maintenance

Cover

Maintaining Your Cisco 7513, Cisco 7513-MX, and Cisco 7576 Router

Loosen these

screws (10)

Figure

7-12)

OL-5008-03 B0