Cables to Go 29343 Kullanıcı Kılavuzu - Sayfa 6

Genişletici Cables to Go 29343 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cables to Go 29343 7 sayfaları. Usb to serial db9 superbooster wall plate

Sayfayı Yazdır

Terminating a Cat5/Cat5E/Cat6 Cable Using the Tool-less IDC

1) Open the plug by lifting the clear plastic end

2) Pin 1 of the connector is on the left side of the clear plastic shell while Pin 8 is on

the right side of the connector (with RJ45 connector facing away from you)

3) Thread the white/orange conductor on your Cat5/5E/6 cable into Pin 1

4) Thread the orange conductor on your Cat5/5E/6 cable into Pin 2

5) Thread the white/green conductor on your Cat5/5E/6 cable into Pin 3

6) Thread the blue conductor on your Cat5/5E/6 cable into Pin 4

7) Thread the white/blue conductor on your Cat5/5E/6 cable into Pin 5

8) Thread the green conductor on your Cat5/5E/6 cable into Pin 6

9) Thread the white/brown conductor on your Cat5/5E/6 cable into Pin 7

10) Thread the brown conductor on your Cat5/5E/6 cable into Pin 8

11) Repeat steps 1-10 to terminate the other end of your Cat5/5E/6 cable

Pin 8

Pin 1