Argo LILIUM EVO 13 Kullanım Talimatları Kılavuzu - Sayfa 10

Nem Alıcı Argo LILIUM EVO 13 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Argo LILIUM EVO 13 12 sayfaları.

MAINTENANCE OF THE HUMIDIFIER'S EXTERIOR SURFACE

Warning

Always pull the dehumidifier's plug out of the power socket before cleaning it, to prevent electric

shock and malfunction.

Warning

Do not wet the appliance or immerse it in water, otherwise electric shocks may occur.

Use a damp and soft cloth to clean the exterior surface of the dehumidifier.

Do not use solvents, petrol, xylene, talcum powder or brushes to clean the unit: these may damage

the surface or colour of the casing.

We advise removing the tank once every few weeks to prevent mould and bacteria forming on it. Fill the tank with clean

water a small amount of detergent; swill the water around in it, then it out and rinse it thoroughly.

V 11/18

CLEANING AND MAINTENANCE

CLEANING THE WATER TANK

The filter is designed to remove dust or dirt from the air.

If the filter is clogged by dust, electricity consumption will be higher than

normal.

Cleaning instructions:

Remove the tank.

Remove the filter by pulling the flap and pulling down the

filter until complete extraction. Clean the filter with a vacuum

cleaner or wash it with clean water at no more than 40°C.

DO NOT USE ALCOHOL, BENZENE OR OTHER

AGGRESSIVE PRODUCTS TO CLEAN THE FILTER.

the filter to dry naturally, then reposition it in the relevant

slot.

Reinsert the filter pushing it upwards until you hear a sound.

Reposition the tank.

Do not use the dehumidifier without the filter as dust may affect the

efficiency of the evaporator, resulting in higher energy consumption.

Leave