Digitek G-Line Pro Kurulum Talimatları Kılavuzu - Sayfa 2

Güvenlik Sistemi Digitek G-Line Pro için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Digitek G-Line Pro 14 sayfaları.

OK!

NO!

Rev05/KM/271113/DigProInst

1.0 – Alarm Positioning

Securing the alarm control unit:



Secure/ Dry location, for example under the

motorcycle seat or behind a fixed panel.



It is important to give the rubber sheath a 'goose-

neck' bending as shown in the picture opposite and

secure with a tie wrap to help prevent water

ingress.



Pay attention not to muffle the siren speaker.



Secure away from moving mechanical parts.



Keep away from devices that could reach high

temperatures when the vehicle is in use.



Secure into position with the supplied zip-tie.

Attention: Great care should be taken when routing the alarm

power supply wires. Avoid trapping the wires and keep away

from moving parts.

Do not install the alarm unit in this position as water ingress

over time may seep through the rubber sheath and

permanently damage the electronic circuit making the alarm

system unreliable.

Warrant will be void!

ATTENTION; Do not jet wash the alarm ECU. The alarm

warranty will not cover damages to the alarm system due to

water ingress caused by improper installation OR jet

washing!

2/14

www.digitek-moto.com

G-Line 'Pro' Alarm

System