Cisco Aironet 1140 Series Başlangıç Kılavuzu - Sayfa 20

Ağ Donanımı Cisco Aironet 1140 Series için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Cisco Aironet 1140 Series 31 sayfaları. Autonomous access point
Ayrıca Cisco Aironet 1140 Series için: Başlangıç Kılavuzu (35 sayfalar), Yapılandırma Kılavuzu (40 sayfalar), Veri Sayfası (6 sayfalar), Başlangıç Kılavuzu (37 sayfalar)

Sayfayı Yazdır

Cisco Aironet 1140 Series Başlangıç Kılavuzu

22/09/2019

MAC address is the 12- character hexadecimal address of the switch port to which the

access point is attached. The MAC address format is HHHH.HHHH.HHHH.

Step 6 Click Apply. The access point reboots con gured with the power settings you speci ed.

Note You might have to refresh your browser screen to see the current status indicating that the

access point radios are enabled.

Finding More Troubleshooting Help

If you are still experiencing di culty, before contacting Cisco, look for a solution to your problem in

this guide or the troubleshooting chapter of the hardware installation guide for the access point you

are using. These, and other documents, are available on Cisco.com. Follow these steps to access

and download these documents:

Step 1 Open your web browser and go to http://www.cisco.com.

Step 2 Click

Products &

Step 3 Click Wireless. The Wireless Introduction page appears.

Step 4 Scroll down to the Product Portfolio section.

Step 5 Under Access Points, click

Introduction page appears.

Step 6 Scroll down to the Support window and click

Series Install and Upgrade page appears.

Step 7 Click

Install and Upgrade

Guides page appears.

Step 8 Select the section that best suits your troubleshooting needs.

8 Access Point Speci cations

Table 4

lists the technical speci cations for the 1140 series autonomous access point.

Table 4 Access Point Speci cations