Cisco Aironet 1140 Series Başlangıç Kılavuzu - Sayfa 8
Ağ Donanımı Cisco Aironet 1140 Series için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Cisco Aironet 1140 Series 31 sayfaları. Autonomous access point
Ayrıca Cisco Aironet 1140 Series için: Başlangıç Kılavuzu (35 sayfalar), Yapılandırma Kılavuzu (40 sayfalar), Veri Sayfası (6 sayfalar), Başlangıç Kılavuzu (37 sayfalar)
Sayfayı Yazdır
22/09/2019
Note The integrated antenna design of the 1140 series access point is designed for horizontal
surfaces, (table top and ceiling installations). When mounted to such surfaces, the
integrated antennas produce the best antenna radiation pattern. For advanced features
such as voice, location, and rogue access point detection, ceiling mounting is strongly
recommended. However, for smaller areas such as conference rooms, kiosks,
transportation, and hot-spot usage where the customer is concerned primarily with data
coverage and not advanced features, you can mount the unit on a wall using wall anchors.
Caution Do not use plastic wall anchors or the keyhole slots on the mounting bracket for ceiling
installations. When mounting the access point on a hard ceiling, use four fasteners
capable of maintaining a minimum pullout force of 20 lbs (9 kg).
6 Con guring Basic Settings
Before you can con gure basic settings, the access point and your PC needs an IP address. See
the
"Obtaining and Assigning an IP Address"
Follow these steps to con gure basic settings for the access point using the GUI Express Setup
page.
Step 1 Open your browser, and enter the access point IP address in the address eld. A username
and password screen appears.
Step 2 Enter the username Cisco and password Cisco. The username and password are case
sensitive.
Step 3 Press Enter. The Summary Status page appears.
https://www.cisco.com/c/en/us/td/docs/wireless/access_point/1140/autonomous/getting_started/guide/ap1140aut_getstart.html
Getting Started Guide: Cisco Aironet 1140 Series Autonomous Access Point - Cisco
section.
8/30