Argo Wallner G30L Kullanım Kılavuzu - Sayfa 6

Kağıt Öğütücü Argo Wallner G30L için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Argo Wallner G30L 8 sayfaları. Guillotine

Sayfayı Yazdır
HOW TO ASSEMBLE THE SAfETY GUARd
1.
lift the cutting blade up to 30 deg.
2.
insert the Safety Guard into the upper cap (A). insert the Safety Guard into the lower
cap (B).
3.
Ready to use.
HOW TO ASSEMBLE THE PAPER RECYCLING BAG
1.
insert the bag holder into the holes on the right side of working table in „A" direction.
2.
Adjust the bag holder back and forth to locate the holder in the proper position.
3.
Reversethe working table and stick the Velcro Straps.
HOW TO USE LASER-POSITIONING SYSTEM
1.
install 2x AAA Battery into the handle battery cap.
2.
lift the cutting blade up to the highest position (important!! or measurement will be
incorrect).
3.
Push the laser button to switch on the laser – Positioning System to measure the
papers.
4.
Please switch off the laser – Positioning System, then cut the papers.
© ARGO S.A.
Nasza oferta w internecie: www.argo.pl