Sony NEX-5D Servis Kılavuzu - Sayfa 29
Dijital Kamera Sony NEX-5D için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Sony NEX-5D 34 sayfaları. Interchangeable lens digital camera
Ayrıca Sony NEX-5D için: Servis Kılavuzu (49 sayfalar)
Sayfayı Yazdır
Assembly-1: Method of attachment of
Cabinet (Rear) Assy
Open the LCD as shown below.
Fit the Cabinet (Rear) Assy along the angle of LCD.
Incline Cabinet (Rear) Assy while turning it counterclockwise,
then fit it in LCD.
NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2
A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED
Assembly-2: Temporally secure
FP-1237 Flexible Complete Board
Before assembling Frame Assy, temporally secure
FP-1237 Flexible Complete Board.
Frame Assy
Edge of
Frame Assy
FP-1237 Flexible Complete Board
Assembly-3: Insulating Sheet A (SY) putting position
Align with the upper
edge of the connector.
Align with the right edge
Insulating Sheet A (SY)
of the connector.
Assembly-4: LC Flexible Insulating Sheet
putting position
Ground
Align with the
lower edge
of the ground.
LC Flexible Insulating Sheet
FP-1237 Complete Board
3. ASSEMBLY
Assembly-5: LC Connector Insulating Sheet,
LC Flexible Insulating Sheet
putting position
LC Connector Insulating Sheet
LC Cabinet (Rear) Assy
Without running on the edge.
LC Flexible Insulating Sheet
Assembly-6: Method of attachment of BT Lid Assy
BT Lid Shaft
BT Lid Assy
Cabinet (Rear) Assy
A
B
A
B
BT Lid Open
Spring
3-1
Assembly-7: Screw tightening sequence when
assembling the exterior parts
(NEX-3A/3D/3K)
Tighten the four screws in sequence of 1 to 4 as shown below.
Cabinet (Rear) Assy
4
1
3
2
Cabinet (Front) Assy
Tighten the two screws in sequence of 1 to 2 as shown below.
Grip (210)
1
2
Tighten the five screws in sequence of 1 to 5 as shown below.
Front Cabinet Assy
Side Cover (210)
1
2
5
3
4
Rear Cabinet Assy
Assembly-8: Shaft Cushion (MF) putting position
Shaft Cushion (MF)
Frame Assy
Without running
on the mold part.