Sony PlayStation Portable Kullanım Kılavuzu

Dijital Kamera Sony PlayStation Portable için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sony PlayStation Portable 2 sayfaları. Screen replacement guide
Ayrıca Sony PlayStation Portable için: Güvenlik ve Destek (28 sayfalar), Hızlı Referans (33 sayfalar), Kullanım Kılavuzu (24 sayfalar), Kullanıcı Kılavuzu (24 sayfalar), Kullanım Kılavuzu (20 sayfalar), Kullanım Kılavuzu (24 sayfalar), Kullanım Kılavuzu (40 sayfalar), Kullanım Kılavuzu (21 sayfalar), Kullanım Kılavuzu (16 sayfalar), Onarım ve Parçalar (3 sayfalar), Hızlı Başlangıç Kılavuzu (15 sayfalar), Güvenlik Kılavuzu (12 sayfalar), Kullanım Kılavuzu (4 sayfalar), Hızlı Referans (34 sayfalar), Kullanım Kılavuzu (2 sayfalar), Güvenlik Kılavuzu (25 sayfalar)

Sayfayı Yazdır

Sony PlayStation Portable Kullanım Kılavuzu

Cradle / Base

Instruction Manual / Mode d'emploi / Manual de instrucciones

PSP-N340



Check that the PSP ® logo on the system and the

indentation on the cradle front are lined up.

Assurez-vous que le logo PSP ® du système et les

encoches à l'avant de la base sont alignés.

Compruebe que el logotipo PSP ® del sistema y la

hendidura en la parte frontal de la base están alineados.





Precautions

Before using this product, carefully read this manual and retain it for future reference. Refer also

to the instructions for the PSP

go system, especially the Precautions section.

Safety

 Do not allow metal objects to come into contact with the any of the connectors.

 Keep the cradle out of the reach of small children.

 Do not use a power source other than the officially branded or licensed AC adaptor/AC power

cord or USB cable (products supplied or sold separately).

 Do not connect the AC power cord to a voltage transformer or inverter.

 Do not touch the cradle with wet hands.

 If the product does not function properly, disconnect it from the electrical outlet immediately,

and contact SCEA Consumer Services at http://www.us.playstation.com/support or call

1-800-345-7669.

Before using

 The cradle is compatible for use with the PSP

used with the PSP-1000/2000/3000 series.

 To clean this product, use a soft, dry cloth. Do not use solvents or other chemicals.

Attaching and removing the PSP

The PSP

go system can be attached to or removed from the cradle regardless of whether the

power is off or on. To attach the PSP

go system to the cradle, carefully line up the connectors on

the system with the connectors on the cradle, and then press firmly (figure A).

Removing the PSP

go system (figure )

Tilt the PSP

go system to the front until it is standing straight, and then pull it up from the

cradle. When removng the PSP

go system from the cradle, firmly hold the cradle with one hand.

Line up the connectors carefully and press

firmly.

Alignez le connecteur du système avec

le connecteur de la base, puis appuyez

fermement.

Alinee el conector del sistema con el

conector de la base y presione con firmeza.

Multi-use (USB/VIDEO OUT) connector

DC IN 5V connector

Connecteur multiple (USB/VIDEO OUT)

Connecteur DC IN 5V

Conector DC IN 5V

Conector multiuso (USB/VIDEO OUT)

go system (PSP-N1000 series) only. It cannot be

go system

Charging the PSP

To charge the PSP

 AC adaptor, AC power cord and USB cable (supplied with the PSP

 AC adaptor and AC power cord (supplied with the PSP-1000/2000/3000 series system)

When the PSP

orange. The POWER indicator turns off when the battery is fully charged.

Hints

 You can also use the PSP-100 AC Adaptor (sold separately; compatible with the

PSP-1000/2000/3000 series) or the PSP-N100 AC Adaptor (sold separately; compatible

with the PSP

http://www.us.playstation.com.

 For information about estimated battery charging time, refer to the instruction manual for the

PSP

go system.

Charging with the AC adaptor (supplied with the PSP

Connect the USB cable that is supplied with the PSP

OUT) connector (figure C) on the cradle and to the AC adaptor.

4-155-683-11(1)

Charging with the AC adaptor (supplied with the PSP-1000/2000/3000 series system)

Connect the AC adaptor to the DC IN 5V connector (figure C) on the cradle.

Charging with a USB device (using the PSP

When the cradle is connected to a USB device such as a PC, the PSP

a USB mass storage device. When connected to a USB port on a PC, the PSP

charged while sending and receiving data to and from the PC.

Connect one end of the USB cable to the multi-use (USB/VIDEO OUT)

connector (figure C) on the cradle.

Connect the other end of the USB cable to a USB device such as a PC.

With the PSP

The PSP

screen and charging begins.

Hints

 Do not disconnect the USB cable or AC adaptor while transferring data, as doing so may cause

data corruption.

 To switch the PSP

Connection).

 You cannot charge the PSP

other operations. Use the AC adaptor to charge the battery in such situations.

Outputting video to a TV

You can use a video output cable (sold separately) to output video from the PSP

system to a TV. For details, refer to the online user's guide for the PSP

(http://manuals.playstation.net/document/).

Connect the video output cable to the multi-use (USB/VIDEO OUT) connector

(figure C) on the cradle.

With the PSP

button on the system for at least five seconds to switch the video output.

Select the video input on the TV.

Select the video input that matches the connectors you are using on the TV.

Cancelling video output to the TV

Press the display button on the PSP

the video display on the PSP

Précautions

Avant d'utiliser ce produit, veuillez lire attentivement ce mode d'emploi et conservez-le

précieusement pour toute référence future. Consultez aussi les instructions relatives au système

PSP

go, plus particulièrement la section sur les Précautions.

Sécurité

 Ne laissez aucun objet métallique toucher l'un des connecteurs.

 Conservez la base hors de portée des jeunes enfants.

 N'utilisez aucune source d'alimentation autre que l'adaptateur AC, cordon d'alimentation ou

câble USB de marque officielle ou approuvée (fournis ou vendus séparément).

 Ne branchez pas le cordon d'alimentation sur un transformateur de tension ou sur un convertisseur.

 Ne touchez pas la base avec des mains mouillées.

 Si le produit ne fonctionne pas correctement, déconnectez-le immédiatement de

la prise de courant et contactez le service consommateurs de SCEA à l'adresse

http://www.us.playstation.com/support ou appelez le 1-800-345-7669.

Avant utilisation

 La base n' e st compatible qu'avec le système PSP

avec les modèles PSP-1000/2000/3000.

 Pour nettoyer ce produit, utiliser un chiffon doux et sec. N'utilisez aucun solvant ou autre

produit chimique.

Attacher ou détacher le système PSP

Le système PSP

connecter le système PSP

puis appuyez fermement (figure A).

go system battery

go system using the cradle, you must have either of the following:

go system is being charged, the POWER indicator on the PSP

go system) to charge the PSP

go system battery. For details, visit

go system as a USB mass storage device)

go system turned on, attach the system to the cradle.

go system automatically changes to USB mode. [USB Mode] is displayed on the

go system to USB mode manually, select

go system using a USB device while playing a game or performing

go system turned on and attached to the cradle, press the display

go system to cancel video output to the TV and reactivate

go system.

go (série PSP-N1000). Elle ne peut être utilisée

go peut être attaché ou détaché de la base, qu'il soit allumé ou non. Pour

go à la base, alignez les connecteurs du système avec ceux de la base,

go system)

go system is lit in

go system)

go system to the multi-use (USB/VIDEO

go system is recognized as

go system can be

(Settings)

(USB

system