Sony SRG-X400 Manuel - Sayfa 6

Dijital Kamera Sony SRG-X400 için çevrimiçi göz atın veya pdf Manuel indirin. Sony SRG-X400 15 sayfaları. Srt introduction
Ayrıca Sony SRG-X400 için: Komut Listesi (41 sayfalar), Teknik Kılavuz (15 sayfalar)

Sayfayı Yazdır

Manufacturer: Sony Imaging Products & Solutions Inc.

Model: BRC-X400/SRG-X series

Device Type: Camera

power_push

tally_on, tally_off

tally_level_off, tally_level_low,

tally_level_high

camera1, camera2

af_mode_normal, af_mode_interval,

af_mode_zoomtrigger

system_tab_pressed,

videoout_tab_pressed, ptzf_tab_pressed,

exposure_tab_pressed,

color_tab_pressed, preset_tab_pressed

preset_stop

FEEDBACK:

15 Volvo Drive · Rockleigh, NJ 07647

800.237.2041 / 201.767.3400

or once turning off and on the camera using power button to reflect the setting.

video_1: 1280x720/59.94p (VGA)

video_2: 1280x720/50.94p

video_3: 1920x1080/29.97p

video_4: 1920x1080/59.94i

video_5: 1920x1080/59.94p (Level A)

video_6: 1920x1080/59.94p (Level B)

video_7: 3840x2160/29.97p (only for 4K supported model)

video_8: 1280x720/50p

video_9: 1920x1080/25p

video_10: 1920x1080/50i

video_11: 1920x1080/50p (Level A)

video_12: 1920x1080/50p (Level B)

video_13: 3840x2160/25p (only for 4K supported model)

video_14: 1920x1080/23.98p

video_15: 3840x2160/23.98p (only for 4K supported model)

The other signals that are not last set will be changed to 0 via corresponding

feedback control signals.

Press to change the camera to stand-by or power-on state.

Press to set the tally mode to on/off.

Press to set the tally level to either off, low or high. The other signals that are not

last set will be changed to 0 via corresponding feedback control signals.

Press to select the target camera for control.

Press to set auto focus mode to either normal, interval or zoom trigger. The other

signals that are not last set will be changed to 0 via corresponding feedback control

signals.

Press to select tab in the SmartGraphics GUI to either System, Video out, PTZF,

Exposure, Color or Preset tab. The other signals that are not last set will be

changed to 0 via corresponding feedback control signals.

Press to stop the currently on-going preset operation. In case that the preset mode

is set to Trace mode, pressing this signal will stop the currently on-going PTZ trace

operation.

For more information please contact our Crestron Application Market team at

[email protected]. The information contained on this document is privileged

and confidential and for use by Crestron Authorized Dealers, CSP Members, A+ Partners

and Certified Integrated Partners only. Specifications subject to change without notice.

http://application.market.com