Sony SRG-X400 Teknik Kılavuz - Sayfa 5

Dijital Kamera Sony SRG-X400 için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. Sony SRG-X400 15 sayfaları. Srt introduction
Ayrıca Sony SRG-X400 için: Manuel (15 sayfalar), Komut Listesi (41 sayfalar)

Sayfayı Yazdır

Technical Guide | BRC-X400/SRG-X400/X120

Pre-configuration Settings

This section describes some pre-configuration settings you will need before activating the SRT

function for the cameras.

3.1. HTTP/RTSP setting

The HTTP/RTSP communication setting need to be enabled in order to communicate via network

before the SRT function of the camera is enabled. Please refer to the Operation Manual of the target

camera, and set the HTTP/RTSP communication setting.

Ref).

The section of [Adjusting and Configuring the Camera through On-Screen Menus] – [SYSTEM

Menu] - [HTTP/RTSP] of the Camera's Operation Manual.

The section of [Accessing the Camera from a Web Browser] – [Enabling HTTP/RTSP in the

Camera] of the Camera's Operation Manual.

3.2. Set IP address by using the RM-IP Setup Tool

For IP communication, the IP address needs to be set. You can use RM-IP Setup Tool to assign IP

address to the camera. Please refer to the RM-IP Setup Tool Guide for more details.

[Note] The DHCP setting cannot be enabled from the RM-IP Setup Tool.

3.3. Change the default password

When the procedure of 3.1 and 3.2 are performed, HTTP access to the camera is available. Please

change the default password (initial password) according to the Operation Manual of the Camera.

Ref).

The section of [Accessing the Camera from a Web Browser]-[Changing the Initial Password] of the

Camera's Operation Manual.

Sony

SRT introduction

Version 1.0