Sony XCI-V100 Teknik Kılavuz - Sayfa 4

Dijital Kamera Sony XCI-V100 için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. Sony XCI-V100 23 sayfaları. Intelligent

System Components

An Intelligent Camera XCI-SX100/SX100C/V100/V100C system can include the following optional products.

Note

The DC-700 camera adapter is not recommended, as its power supply may become insufficient depending on the camera

operation mode. Use a power supply that is at least 12 V, 2 A (24 VA).

1 Intelligent Camera

This is a high-resolution camera equipped with a

CCD and built-in x86-compatible CPU.

2 CCXC-12P02N (2 m, 6.6 ft)/05N (5 m, 16.4 ft)/

10N (10 m, 32.8 ft)/25N (25 m, 82 ft) camera

cable (commercially available from Sony)

This is attached to the DC IN connector of the

camera and is used for power supply and trigger-

signal input/output.

3 Lens (commercially available)

Use a lens appropriate for the camera module and

your needs.

Note

When using a CS mount lens, be sure to remove the

C mount adaptor on the camera. In addition, a

separate 4-pin to 6-pin conversion cable is required

when using a DC iris lens.

4 Fall-prevention wire rope (supplied)

This is attached to one of the auxiliary holes (top),

using the supplied screw.

Note

Always use the fall-prevention wire rope to secure

the camera when installing the camera to a ceiling.

5 LAN cable (enhanced category 5) (commercially

6 USB mouse/keyboard (commercially available)

7 CompactFlash (commercially available)

available)

This is attached to the LAN connector of the

camera and is used to access a network.

Note

Do not connect the LAN cable to a network where

excess voltage is present.

Use a mouse or keyboard that supports USB.

Note

When using a USB device other than a mouse or

keyboard, make sure that the device is self-

powered.

Use a FixedDisk and Industrial type CompactFlash.

Note

Be aware that malfunctions may occur if you use a

removable disk.