Sony ZV-E10 Başlangıç Kılavuzu

Dijital Kamera Sony ZV-E10 için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Sony ZV-E10 2 sayfaları. Interchangeable lens digital camera

Sayfayı Yazdır

Interchangeable Lens Digital Camera

E-mount

Startup Guide

ZV-E10

About the manual for this camera

This guide describes the necessary preparations to start using the

product, basic operations, etc. For details, refer to the "Help Guide"

(web manual).

"Help Guide" (Web manual)

https://rd1.sony.net/help/ilc/2070/h_zz/

ZV-E10 Help Guide

Looking for valuable information, such as essential points

on shooting

This website introduces convenient functions, ways of usage, and setting

examples.

Refer to the website when you set up your camera.

Tutorials

https://www.sony.net/tutorial/zv/e10/

Preparations

Checking the supplied items

The number in parentheses indicates the number of pieces.

• Camera (1)

• USB Type-C® cable (USB 2.0) (1)

• AC Adaptor (1)

• Wind screen (1) (attached to the wind

The type of the AC Adaptor may differ

screen adaptor)

depending on the country/region.

• Wind screen adaptor (1)

• Power cord (mains lead) (1)*

• Shoulder strap (1)

(supplied in some countries/regions)

• Body cap (1)*

* Multiple power cords may be

* Only for the ZV-E10

supplied with this equipment. Use the

• Startup Guide (this manual) (1)

appropriate one that matches your

country/region. See "Notes on use."

• Reference Guide (1)

• Rechargeable battery pack NP-FW50

(1)

Identifying parts

For details on identifying parts, refer to the following Help Guide URL:

https://rd1.sony.net/help/ilc/2070_parts/h_zz/

Inserting the battery pack (supplied)/memory card

5-027-835-11(1)

(sold separately) into the camera

Open the battery/memory card cover, and insert the battery pack and a memory

card into the camera. Then, close the cover.

Lock lever

Battery pack

Make sure that the battery pack is facing in the correct direction, and insert it while

pressing the battery lock lever.

Memory card

Insert the memory card with the notched corner facing as illustrated.

This camera is compatible with SD memory cards and Memory Stick media. For

details on the compatible memory cards, refer to the "Help Guide."

When you use a memory card with this camera for the first time, format the card

using the camera in order to stabilize the performance of the memory card.

Note

• Formatting erases all data, including protected images and registered settings

(M1 to M4). Once erased, this data cannot be restored. Save valuable data to a

computer, etc. before formatting.

Charging the battery pack

Turn the power off.

If the camera is turned on, the battery pack will not be charged.

Connect the camera with the battery pack

inserted to the AC Adaptor (supplied)

using the USB cable (supplied), and

connect the AC Adaptor to the wall outlet

(wall socket).

The charge lamp will light up when charging

starts. When the charge lamp turns off,

charging is completed.

Attaching a lens

Remove the body cap from the camera and the rear lens cap from the

rear of the lens.

Mount the lens by aligning the two white index marks (mounting

indexes) on the lens and camera.

While pushing the lens lightly toward the camera, turn the lens slowly

in the direction of the arrow until it clicks into the locked position.

Setting the language and the clock

Set the ON/OFF (Power) switch to "ON" to turn on the camera.

Ensure the notched

corner faces correctly.

Memory card

Charge lamp

Mounting indexes

ON/OFF (Power) switch

Control wheel

Select items : //// /

Confirm : Center button

Select the desired language and then press the center of the control

wheel.

Make sure that [Enter] is selected on the screen and then press the

center button.

Select the desired geographic location and then press the center

button.

Set [Daylight Savings], [Date/Time], and [Date Format], and then select

[Enter] and press the center button.

If you want to reconfigure the date/time or the area setting at a later point,

select MENU 

(Setup)  [Date/Time Setup] or [Area Setting].

Shooting

Shooting movies

Press the Still/Movie/S&Q button to select

the movie recording mode.

Each time you press the button, the shooting

mode switches in the order of still image

shooting mode, movie recording mode, and

slow-motion/quick-motion shooting mode.

Press the MENU button and

(Camera Settings2) 

select

Shoot Mode]  the desired

[

shooting mode.

Press the MOVIE (Movie) button to start recording.

Press the MOVIE (Movie) button again to stop recording.

Hint

• The start/stop movie recording function is assigned to the MOVIE (Movie) button

in the default settings. Even without switching shooting modes in Step 1, you

can start movie recording from still image shooting mode by pressing the MOVIE

(Movie) button.

Using the wind screen (supplied)

Use the wind screen to reduce wind noise picked

up by the internal microphone when recording a

movie.

Attach the wind screen to the Multi Interface

Shoe.

Shooting still images

Press the Still/Movie/S&Q button to select

the still image shooting mode.

Each time you press the button, the shooting

mode switches in the order of still image

shooting mode, movie recording mode, and

slow-motion/quick-motion shooting mode.

Press the MENU button and select

(Camera Settings1) 

Shoot Mode]  the desired shooting

[

mode.

Press the shutter button halfway down

to focus.

Press the shutter button all the way

down.

Still/Movie/S&Q

button

MOVIE (Movie)

button

MENU button

Wind screen

Multi Interface Shoe

Still/Movie/S&Q

button

Shutter button

MENU button