Sony AIR-SA20PK (AIRSA15R) Kullanım Talimatları Kılavuzu - Sayfa 37
Stereo sistemi Sony AIR-SA20PK (AIRSA15R) için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony AIR-SA20PK (AIRSA15R) 47 sayfaları. Wireless audio system
Ayrıca Sony AIR-SA20PK (AIRSA15R) için: Kullanım Talimatları Kılavuzu (44 sayfalar)
Sayfayı Yazdır
To change the AM tuning interval
The AM tuning interval is factory-preset
to 10 kHz.
Use the main unit to change the AM
tuning interval.
1
Tune in any AM station.
2
Press SYSTEM MENU on the unit.
3
Press TUNING/SELECT
+/-
on the
unit repeatedly until "AM STEP"
appears, then press ENTER on the
unit.
4 Press TUNING/SELECT
+/-
on the
unit repeatedly to select "9K" or "10K;'
then press ENTER on the unit.
"0 K" appears.
S
Press ENTER on the unit again to
confirm the setting.
When you change the interval, all
the AM preset stations are erased. To
reset the interval to the factory preset,
repeat the procedure.
To reset the main unit to factory
settings
If the main unit still does not operate
properly, reset the main unit to factory
settings.
1
Disconnect and reconnect the power
supply cord, and then turn on the
unit.
2
Press SYSTEM MENU on the unit.
3
Press TUNING/SELECT
+/-
on the
unit repeatedly until "RESET" appears,
then press ENTER on the unit.
"RESET OK" appears.
4 Press ENTER on the unit again to
confirm the setting.
All user-configured settings are
deleted, such as preset radio stations.
To reset the sub unit to factory
settings
If the sub unit still does not operate
properly, reset the sub unit to factory
settings.
1
Disconnect and reconnect the power
cord, and then turn on the unit.
2
Press ./CANCEL, DISPLAY and
1/(')
on the unit at the same time.
All user-configured settings, such as
timer, clock, etc. are deleted.