Sony AIR-SA20PK (AIRSA15R) Kullanım Talimatları Kılavuzu - Sayfa 46

Stereo sistemi Sony AIR-SA20PK (AIRSA15R) için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony AIR-SA20PK (AIRSA15R) 47 sayfaları. Wireless audio system
Ayrıca Sony AIR-SA20PK (AIRSA15R) için: Kullanım Talimatları Kılavuzu (44 sayfalar)

Sayfayı Yazdır

SONY:

4-119-532-11

(1)

Check the following.

Keep cords that are connected to the S-AIR product (power supply cord, power cord, antennas or

other cords) away from the wireless transceiver and slot.

Bmm

To stabilize S-AIR reception

Read the following when S-AIR reception is poor or unstable.

g~i,

I I

Keep as much space as possible around S-AIR products.

Avoid placing S-AIR products on top of, or directly below, other electronic equipment.

Avoid placing S-AIR products in a closed rack, metal rack, or under a table.

Place so that the wireless transceivers of the S-AIR main unit and sub unit are closer.

Adjust the location (height, orientation, and place in the room) of S-AIR products until reception is

the most stable.

Place so that S-AIR products are separated from other wireless devices.

Place so that S-AIR products are separated from metal doors or tables.

If you cannot improve S-AIR reception, change the "RF CHANGE" setting. For details, refer to the

operating instructions of each S-AIR product.

Same S-AIR ID

Insert firmly

-=--

[0])))

blJ)))

Before using S-AIR products, have the following ready.

• Confirm the wireless transceivers are inserted

correctly.

Insert the wireless transceivers firmly to the depth

into the slots of the S-AIR main unit and sub unit

respectively.

• Confirm that the S-AIR IDs of the S-AIR main unit

and sub unit are the same.

The default setting of the S-AIR IDs of the S-AIR

main unit and sub unit is "A."

Depending on the S-AIR product, you can set the

S-AIR ID by the switch or the setup menu.

For details, refer to the operating instructions of

each S-AIR product.

• Other factors

The following may cause poor reception.

- Materials or structures, such as walls and floors

- The location where an S-AIR product is placed

S-AIR products use a radio frequency of 2.4 GHz. Certain electronic equipment or other factors may

cause lost connection or instability in S-AIR reception.

• Electronic equipment influence

The following may cause interference or cross talk.

- Cellular phones, cordless phones

- Wireless LAN, personal computers

- Game machines using radio signals

- Microwave ovens

When using S-AIR products, place them as far as possible from the above electronic equipment, or

place where S-AIR reception is stable.