Argo LOOP Kullanım Talimatları Kılavuzu - Sayfa 6

Fan Argo LOOP için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Argo LOOP 10 sayfaları. Desk and floor fan (air circulator)

Connect the power cord to a suitable power socket (220-240 V/50Hz~).

Do not use this fan in an area with high humidity, rich of dust or water.

Position the unit vertically on a flat, stable surface.

Press ON/OFF on the fan base or remote control. A sound will indicate that the appliance is on.

This fan can be used as a fan, with 3 modes NATURAL, SLEEP and NORMAL and 3 fan speed options (low - L, medium -

M and high - H).

ON / OFF BUTTON: After inserting the plug into the socket, press the ON / OFF button on the base of the fan to switch on

the product. A red LED indicator on the display (POWER) will indicate that the product is on.

SPEED BUTTON: As soon as the fan is switched on it is set to the Medium ventilation speed, the blue LED indicator on

the display will be on (M) and after 3 seconds it will switch to Low speed (the blue LED indicator will be on (L).

Touch the SPEED button on the fan base to change the ventilation speed in the following sequence: Low (L) -> Medium

(M) -> High (H).

MODE BUTTON: Touch the MODE button on the fan base to select the desired ventilation mode; when it is switched on

for the first time it is set to Natural mode (the blue LED indicator will be on in the display), again touching the MODE

button it will switch to the next Sleep mode (the blue LED indicator will be lit on the display), touching again on switch to

Normal mode. The sequence will then be: Natural -> Sleep -> Normal.

TIMER BUTTON: Touch the Timer button to set the automatic switch-off (Auto-OFF) after 1 hour (the blue LED indicator

will be lit on 1H). Subsequently touching the Timer button it is possible to set a different number of hours of operation,

according to the sequence (expressed in hours of operation): Timer OFF -> 1H -> 2H -> 3H -> 4H -> 5H -> 6H -> 7H

(each touch of the Timer button corresponds to 1 hour of setting the Timer).

V 12/19

HOW TO USE THE APPLIANCE

DISPLAY AND SOFT TOUCH BUTTONS

DISPLAY

SOFT TOUCH BUTTONS

TASTI SOFT TOUCH

(positioned on fan base)

(posti sulla base del ventilatore)