Argo Palladium Kullanım Talimatları - Sayfa 4

Fan Argo Palladium için çevrimiçi göz atın veya pdf Kullanım Talimatları indirin. Argo Palladium 5 sayfaları.

After removing everything from the carton, locate the motor unit and separate the front guard and back guard if they are

connected.

Take the rear guard, mount it in the two holes of the motor unit, and tighten it with only one locking screw provided; the

rear guard will only fit one way: with the handle facing up.

Take the fan blades and align the centre of the blades over the metal spindle protruding from the motor unit. The intent

on the metal spindle aligns with the locking screw on the fan blades. After the blade has been put on, tighten the

locking screw on the fan blades and ensure that the blades is secured to the motor unit.

Align the front guard to the rear guard and lock into place with 3 locking tabs that are located on the guard. Locate the

security nut and bolt and secure the front and rear guards together with security nut and bolt. This is a safety precaution

to prevent the accidental dismantling of the fan.

Locate the pedestal base of the fan. Insert the base of the stand into the pedestal base, then fasten the base and the

pole with the screws provided.

Undo the thumbscrew at the top of the stand(item 10) and align the motor unit complete with guards before fastening.

The appliance does not need to be installed.

Take the base and tube parts from the packing box and loose the 4 joint screws. Fix the tube on the base plate by the joint

screws. Position the unit on a flat, stable surface.

Connect the power cord to a suitable power socket (220-240 V~).

This fan can be used both as 3 fan speed options: low, medium and high.

This fan has a swivel action head giving a smooth oscillation action along with low noise levels, low electrical usage,

reliability with safety, while still providing efficient air flow.

The power switch is incorporated in the speed control switch on the top of the fan.

0- The Fan is switched Off

1- The Fan operates at the lowest speed

2- The Fan operates at the medium speed

3- The Fan operates at the highest speed

The fan can operate in oscillation or static mode. To make the fan head oscillate, push down the Oscillation Knob.

V 03/17

DESCRIPTION OF PARTS

ASSEMBLY INSTRUCTIONS

BASE AND TUBE INSTRUCTIONS

1. Nut

2. Front guard

3. Blade

4. Screw

5. Rear guard

6. Power switch

7. Oscillation knob

8. Motor

9. Power cord

10. Tube

11. Joint screw

12. Base additional part

13. Base